A Cape Cod town that once considered its first wind turbine the crowning achievement of its climate protection plan came close to becoming the first community in the country to decide to tear its turbines down.
Falmouth’s Town Meeting voted down a measure Tuesday night that would have authorized borrowing $14 million to dismantle two turbines.
The measure failed by a vote of 125-72. Town Clerk Michael Palmer said it needed a two-thirds majority to pass. If it had been approved, the borrowing question would have been put before voters in a May referendum.
The Falmouth selectmen’s board chair, Kevin Murphy, flatly calls the turbine project a failure. The board is backing efforts to dismantle the original turbine, which began spinning in 2010, and a newer one.
From the start, neighbors have complained about noise from the turbines. They also attribute a range of physical and mental health problems to them.
But other residents report no problems. Some in town say it’s far too soon to tear down a critical renewable energy project they estimate could produce $450,000 in annual revenue through energy production and renewable energy certificates.
The American Wind Energy Association, which says it promotes wind energy as a clean source of electricity, said it’s the first time any town has considered taking down its turbines. That’s because such projects have such clear financial and environmental rewards, spokeswoman Ellen Carey said.
“People across the country are supportive of wind energy and are benefiting economically,” she said.
Both turbines are built at the town’s waste water treatment plant and provide power for it. The original turbine was the first municipal utility-scale turbine in Massachusetts.
Falmouth resident Mark Cool, who lives near the turbine site,On particularly windy days,wind power generators can surpass all other electricity sources in a country. said persistent headaches started as soon as it began running. He described some so penetrating he felt he needed “to drill a hole in my head to get some sort of relief.”
The 54-year-old air traffic controller didn’t link the turbines to his headaches until his neighbors began talking about similar symptoms.
Cool began a journal, recording variables such as wind direction and headache duration, eventually concluding the headaches occurred only when the wind put him in a turbine’s wake.
In May 2012, 47 people told a board of health hearing about various problems they blamed on the turbines, including sleep deprivation, vertigo and memory loss. But 15 others said there were no problems.
Cool said he doesn’t think there’s science to substantiate negative effects from turbines.
In pushing for their removal, he points to what he said is indisputable, such as noise problems that led the town in May 2012 to shut the turbines down for 12 hours each night. A state study later concluded the turbines’ decibel level was too high at one of its testing sites. Murphy said the reduced hours mean the turbines now lose $100,000 a year.
Worse, Murphy said, is the corrosive town-wide division caused by the turbines,Choose a Tumble dryer from featuring superior clothes drying programmes and precise temperature controls. which he said taints any renewable energy plans. It’s worth it, he said, to borrow the $14 million to get rid of what he calls symbols of failure.
“Any time (residents) ride by those wind turbines they’re reminded of how divided this community is,” he said. “We need to get rid of the division and move forward.A dry-cleaning machine is similar to a combination of a domestic Industrial washing machine, and clothes dryer.” But Falmouth resident Megan Amsler said the debate has not split the town.
Amsler, who served on a town committee that devised ways to mitigate the turbines’ impact, said a silent majority in Falmouth wants to keep the turbines. But a vocal minority has made it something Falmouth can’t even agree to disagree about,While there are many brands and makes of Dry cleaning machine, they are all basically the same in principle and function. she said.
There are far cheaper ways to deal with concerns about the turbines and keep them running, Amsler said. Options include scheduling their operation more precisely to minimize any effects on neighborhoods and buying out adjacent properties.
Amsler added that tearing down the turbines will set a horrible national precedent. Banks will get skittish about financing renewables if a project with the broad local support, like Falmouth’s, can be quickly dismantled by a small group, she said.
Wednesday, April 10, 2013
Tuesday, April 9, 2013
More work to upgrade Northampton’s lights
More work will start this month to install new upgraded street lights in Northampton’s streets.
In the next five years every one of Northamptonshire’s 65,000 street lights will be removed, or replaced and upgraded in a scheme run by Northamptonshire County Council and Balfour Beatty to reduce the county’s carbon emissions,Learn more about the torch light and see what people in and out of your professional network have to say about it. save on energy costs and create a safer and more pleasant environment in the area.
The work will involve installing new street lights and removing the old ones once they are up and running.
A spokesman for Northamptonshire County Council said: “Under the scheme the new street lights will use 40 per cent less energy on a like-for-like basis when compared with the existing stock and will also offer a uniform, white light rather than the patchy orange glow of ‘traditional’ lights. Where is the best place to display my outdoor solar lighting?
“The scheme will allow contractor Balfour Beatty to replace the lamp units and electronics of all streetlights and allow for the replacement of the lighting columns where necessary.
“The first lights to be replaced were ones which had the oldest columns most in need of replacement.”
The work will be delivered in 10 phases, each lasting for six months and the new lights will use the latest technology to deliver more effective white light to improve night time vision and colour recognition.
Norman Baker, local and regional transport minister, said: “Good street lighting is vitally important to reducing road accidents, crime and the fear of crime. We will continue to invest in transport infrastructure that improves safety and provides reassurance to local communities.”
The Private Finance Initiative (PFI) will allow Northamptonshire County Council to carry out improvements and maintenance to street lighting and will introduce state-of-the- art technology for early detection of defective lighting.
The streetlighting PFI scheme started in October 2011 when a number of lights were turned off across the county.Once again, setting the benchmark for automatic Book scanner.
In a bid to reduce energy consumption all the county’s traffic bollards will gradually be replaced with solar powered bollards lit with LED’s.
In the early hours of the morning residential street lights will be dimmed and lights will come on slightly later and switch off a little earlier.
The prototype demonstrated data throughput rates of up to three gigabits per second using light from a floor lamp equipped with common LED lights. Data rates of up to 800 megabits per second were reached by this optical WLAN (wireless local area network) under laboratory conditions, while a complete real time system exhibited at trade fairs reached data throughput of 500 megabits per second.
The patented model supports rates of over one gigabit per second per single light frequency. Most LED lights have three wavelengths of light so speeds of three gigabits per second are feasible.
The key to the increased speed is a proprietary component that increases LED bandwidth from 30 megahertz to 180 megahertz.We sell solar panel for your residential, commercial, or industrial application.
This device would make the use of ordinary street lighting a source of energy for mobile communication as well as ordinary house lighting. The worldwide power savings could be huge as users power out of a network energy source in favor of a room source that is usually available at work, at home, on the street, and almost anywhere.An inventor has created a solar inverter, but he's not giving it away for free..
In the next five years every one of Northamptonshire’s 65,000 street lights will be removed, or replaced and upgraded in a scheme run by Northamptonshire County Council and Balfour Beatty to reduce the county’s carbon emissions,Learn more about the torch light and see what people in and out of your professional network have to say about it. save on energy costs and create a safer and more pleasant environment in the area.
The work will involve installing new street lights and removing the old ones once they are up and running.
A spokesman for Northamptonshire County Council said: “Under the scheme the new street lights will use 40 per cent less energy on a like-for-like basis when compared with the existing stock and will also offer a uniform, white light rather than the patchy orange glow of ‘traditional’ lights. Where is the best place to display my outdoor solar lighting?
“The scheme will allow contractor Balfour Beatty to replace the lamp units and electronics of all streetlights and allow for the replacement of the lighting columns where necessary.
“The first lights to be replaced were ones which had the oldest columns most in need of replacement.”
The work will be delivered in 10 phases, each lasting for six months and the new lights will use the latest technology to deliver more effective white light to improve night time vision and colour recognition.
Norman Baker, local and regional transport minister, said: “Good street lighting is vitally important to reducing road accidents, crime and the fear of crime. We will continue to invest in transport infrastructure that improves safety and provides reassurance to local communities.”
The Private Finance Initiative (PFI) will allow Northamptonshire County Council to carry out improvements and maintenance to street lighting and will introduce state-of-the- art technology for early detection of defective lighting.
The streetlighting PFI scheme started in October 2011 when a number of lights were turned off across the county.Once again, setting the benchmark for automatic Book scanner.
In a bid to reduce energy consumption all the county’s traffic bollards will gradually be replaced with solar powered bollards lit with LED’s.
In the early hours of the morning residential street lights will be dimmed and lights will come on slightly later and switch off a little earlier.
The prototype demonstrated data throughput rates of up to three gigabits per second using light from a floor lamp equipped with common LED lights. Data rates of up to 800 megabits per second were reached by this optical WLAN (wireless local area network) under laboratory conditions, while a complete real time system exhibited at trade fairs reached data throughput of 500 megabits per second.
The patented model supports rates of over one gigabit per second per single light frequency. Most LED lights have three wavelengths of light so speeds of three gigabits per second are feasible.
The key to the increased speed is a proprietary component that increases LED bandwidth from 30 megahertz to 180 megahertz.We sell solar panel for your residential, commercial, or industrial application.
This device would make the use of ordinary street lighting a source of energy for mobile communication as well as ordinary house lighting. The worldwide power savings could be huge as users power out of a network energy source in favor of a room source that is usually available at work, at home, on the street, and almost anywhere.An inventor has created a solar inverter, but he's not giving it away for free..
Freshest fish traded in the dead of the NYC night
The New Fulton Fish Market is the nation’s largest seafood market,
and second in the world to Tokyo’s. Here, in a refrigerated building the
size of six football fields, fishmongers are frenetically filleting,
selling and packaging seafood – 200 million pounds a year worth close to
$1 billion by some estimates. It is headed for restaurant tables,
stores and mouths across America.
Glistening under the fluorescent lights is just about every sea creature. Most come in by truck, but about half are flown in from the ends of the Earth: Arctic char from Iceland; mahi-mahi from Ecuador; hamachi from Japan; branzino from Greece; salmon from Scotland; cockles from New Zealand.
Experienced buyers negotiate prices in seconds, judging quality on a look, a touch, a smell and often a raw taste.
“You know right away if fish is fresh. It’s like looking into a woman’s eyes – you know what’s there,” says Roberto Nunez, a 44-year-old Peruvian immigrant who started out as a dishwasher and has been the buyer for more than a decade for celebrity restaurateurs Lidia Bastianich, her son, Joe Bastianich, and their partner, Mario Batali.
Five nights a week, Nunez shows up at 1 a.m. to purchase as much as $15,000 worth of seafood, enough to meet the demands of 10 restaurants. What’s available on any given night depends on a variety of often unpredictable factors, such as severe weather that keeps fishing fleets in port or a spotty catch in an overfished ocean.
“This is not like ordering tomatoes or potatoes,” Nunez says. “Seafood is wild.”
By 2:30 a.Our large selection which includes led tubes, led strips.m., one of the key items on his handwritten list of orders – 400 pounds of striped bass – remains unfilled from among dozens of vendors.“I’m getting nervous,” he says.
The day’s hundreds of offerings – including crabs, clams,We are well known for our in-house custom printed drum Lamp shade and pendants. mussels, slimy squid, octopus and caviar – are spread out across the floor in ice-lined boxes, a shimmering spectrum of silvers, pinks, reds and browns. Buyers, some vying for the same, scarce items, point to a specific box and cry out, “That’s mine!”
All night, dozens of men in coats and wool caps work to the soundtrack of mini-forklifts whizzing around, honking and spewing exhaust as they move seafood-laden pallets. The smell is a mixture of the fishy and the fresh scent of the ocean.
Nunez finally spots some striped bass. But when he lifts the gills, “it’s no good; they’re brown,” he says dejectedly. (The gills should be bright red). Plus the skin is dry, the eyes are cloudy, and it smells funky.
The hunt continues for the rest of his list: scallops, shrimp, squid, monkfish liver, fluke, shad roe, blowfish.
He spies black sea bass from New Jersey at $6.75 a pound. “How many do you have?” “One hundred pounds,” says vendor John Dias.Solaronlamp is a street lighting for electronic gadgets. “How about $5.50?” Nunez asks. Dias relents.
Nunez later nabs red snapper from the Gulf of Mexico. He feels the fish, smells his fingers. It’s fresh. OK, 60 pounds.
At another stall, he pops a raw Nantucket Bay scallop in his mouth, smiling. It’s $20.50 a pound compared with a normal price of,Learn more about the torch light and see what people in and out of your professional network have to say about it. say, $16. But these are extraordinary, and fresh – “like a baby’s bottom” to the touch.
He waits around for a while, and sure enough, a box lid opens to reveal eight bass from Delaware, weighing 121 pounds. Now, where to find at least 180 pounds more? He rushes off, scouring the cavernous market. And he gets lucky, landing 100 pounds.
Not far away, Peter Panteleakis, who owns two Greek restaurants in Fair Lawn, N.J., is on a hunt of his own for the freshest seafood he can find, such as the sea scallops that still move when poked and a 21-pound piece of local halibut that a vendor slices open to reveal clean, rosy flesh.
The 66-year-old immigrant from a village near Sparta, Greece, who comes by four nights a week with his son, first set foot in the old open-air Fulton fish market in lower Manhattan more than 30 years ago. It was replaced in 2005 by the state-of-the-art South Bronx facility that’s open six nights a week.
Learning from his father, Nick Panteleakis quotes a sign on the market wall: “Good fish ain’t cheap, and cheap fish ain’t good.”
When huge pieces of tuna or swordfish worth thousands of dollars come in, men carrying metal hooks and razor-sharp knives leap into action, splitting them into smaller chunks, sweating even in the regulated temperature of about 39 degrees.
At about 5 a.m., bartering slows as the sun peeks over the East River. Blood-stained gloves rest atop the counters. The forklifts are buzzing around, loading 18-wheelers outside with goods that will be trucked all over the Northeast.The basics of solar panels and how to install a solar photovoltaic system on your roof.
Glistening under the fluorescent lights is just about every sea creature. Most come in by truck, but about half are flown in from the ends of the Earth: Arctic char from Iceland; mahi-mahi from Ecuador; hamachi from Japan; branzino from Greece; salmon from Scotland; cockles from New Zealand.
Experienced buyers negotiate prices in seconds, judging quality on a look, a touch, a smell and often a raw taste.
“You know right away if fish is fresh. It’s like looking into a woman’s eyes – you know what’s there,” says Roberto Nunez, a 44-year-old Peruvian immigrant who started out as a dishwasher and has been the buyer for more than a decade for celebrity restaurateurs Lidia Bastianich, her son, Joe Bastianich, and their partner, Mario Batali.
Five nights a week, Nunez shows up at 1 a.m. to purchase as much as $15,000 worth of seafood, enough to meet the demands of 10 restaurants. What’s available on any given night depends on a variety of often unpredictable factors, such as severe weather that keeps fishing fleets in port or a spotty catch in an overfished ocean.
“This is not like ordering tomatoes or potatoes,” Nunez says. “Seafood is wild.”
By 2:30 a.Our large selection which includes led tubes, led strips.m., one of the key items on his handwritten list of orders – 400 pounds of striped bass – remains unfilled from among dozens of vendors.“I’m getting nervous,” he says.
The day’s hundreds of offerings – including crabs, clams,We are well known for our in-house custom printed drum Lamp shade and pendants. mussels, slimy squid, octopus and caviar – are spread out across the floor in ice-lined boxes, a shimmering spectrum of silvers, pinks, reds and browns. Buyers, some vying for the same, scarce items, point to a specific box and cry out, “That’s mine!”
All night, dozens of men in coats and wool caps work to the soundtrack of mini-forklifts whizzing around, honking and spewing exhaust as they move seafood-laden pallets. The smell is a mixture of the fishy and the fresh scent of the ocean.
Nunez finally spots some striped bass. But when he lifts the gills, “it’s no good; they’re brown,” he says dejectedly. (The gills should be bright red). Plus the skin is dry, the eyes are cloudy, and it smells funky.
The hunt continues for the rest of his list: scallops, shrimp, squid, monkfish liver, fluke, shad roe, blowfish.
He spies black sea bass from New Jersey at $6.75 a pound. “How many do you have?” “One hundred pounds,” says vendor John Dias.Solaronlamp is a street lighting for electronic gadgets. “How about $5.50?” Nunez asks. Dias relents.
Nunez later nabs red snapper from the Gulf of Mexico. He feels the fish, smells his fingers. It’s fresh. OK, 60 pounds.
At another stall, he pops a raw Nantucket Bay scallop in his mouth, smiling. It’s $20.50 a pound compared with a normal price of,Learn more about the torch light and see what people in and out of your professional network have to say about it. say, $16. But these are extraordinary, and fresh – “like a baby’s bottom” to the touch.
He waits around for a while, and sure enough, a box lid opens to reveal eight bass from Delaware, weighing 121 pounds. Now, where to find at least 180 pounds more? He rushes off, scouring the cavernous market. And he gets lucky, landing 100 pounds.
Not far away, Peter Panteleakis, who owns two Greek restaurants in Fair Lawn, N.J., is on a hunt of his own for the freshest seafood he can find, such as the sea scallops that still move when poked and a 21-pound piece of local halibut that a vendor slices open to reveal clean, rosy flesh.
The 66-year-old immigrant from a village near Sparta, Greece, who comes by four nights a week with his son, first set foot in the old open-air Fulton fish market in lower Manhattan more than 30 years ago. It was replaced in 2005 by the state-of-the-art South Bronx facility that’s open six nights a week.
Learning from his father, Nick Panteleakis quotes a sign on the market wall: “Good fish ain’t cheap, and cheap fish ain’t good.”
When huge pieces of tuna or swordfish worth thousands of dollars come in, men carrying metal hooks and razor-sharp knives leap into action, splitting them into smaller chunks, sweating even in the regulated temperature of about 39 degrees.
At about 5 a.m., bartering slows as the sun peeks over the East River. Blood-stained gloves rest atop the counters. The forklifts are buzzing around, loading 18-wheelers outside with goods that will be trucked all over the Northeast.The basics of solar panels and how to install a solar photovoltaic system on your roof.
Panasonic Presents "Energetic Energies" Concept in Milan
Panasonic Corporation today announced the opening of its "Energetic
Energies" concept installation at this year's Milano Salone Del Mobile,
one of the largest and most influential design exhibitions in the world,
held annually in Milan. The installation this year was again designed
by noted architect, Akihisa Hirata. This year, in addition to the
concept installation, Panasonic will also hold its "Eco Learning
Program", combining its "products", "art" and "education" during the
exhibition.
The main presentation is a 30-meter-long miniature cityscape,We are well known for our in-house custom printed drum Lamp shade and pendants. with 6,000 solar panels covering clusters of buildings. The panels create rolling hills over the manmade city. Visual and acoustic effects emanate from 16 projectors with speakers dotted about the hillsides, expressing the dynamism of nature. As you walk through the hills, you can experience the integration of the manmade and natural environments.
Passing through the miniature world, you will find mirrored rooms. This is an installation created with Panasonic's products for energy management,Solaronlamp is a street lighting for electronic gadgets. like the solar panels used in the main presentation, storage battery system, LED lighting, and HEMS (Home Energy Management System). The mirrors reflect the brilliance of four LED chandeliers utilizing Panasonic's original technology and created in collaboration with two Milan-based designers, allowing you to experience the versatility of LED light.
In time with the exhibition, the company will also hold its "Eco Learning Program" at elementary schools of Milan. In the classes, children will have the opportunity to use incandescent lights, fluorescent lights and LED lights to learn about the mechanism of lighting and discover about energy saving through experiments using hand generators. In addition, a craft class where children can enjoy making LED paper-covered lamp stands will also be held as a part of the program. The students who participate in the Eco-class will be invited to the company's installation in Milano University in order to gain a better understanding of energy management through the combination of "products", "art" and "education".
Here,The basics of solar panels and how to install a solar photovoltaic system on your roof. solar panels are scattered, spreading like plants, on volumes resembling a cluster of buildings that forms a city to create a landscape of hills. Shadows of clouds pass slowly over these "hills" as if moving atop natural terrain, thus encouraging city residents to regain their relationship with the forgotten sky.
In the near future, numerous solar panels will cover the roofs of buildings, while changing the scenery of daily life. We believe that we can develop both a system of solar-power generation with the panels in a fixed arrangement and other options that take into account various relationships, such as that involving the pattern of foliage.
We hope future city streets,Our large selection which includes led tubes, led strips. where the use of natural energy is vital, teem with life by becoming enmeshed with their natural environment.
LEDs and the associated solid state lighting solutions are due to become the dominant form of lighting in all forms in within the next five years. Solid state lighting is an energy efficient eco-friendly technology that will save billions of tons of carbon emissions when fully implemented. There are also no recycling issues that fluorescent lighting poses with mercury content.Learn more about the torch light and see what people in and out of your professional network have to say about it.
The main presentation is a 30-meter-long miniature cityscape,We are well known for our in-house custom printed drum Lamp shade and pendants. with 6,000 solar panels covering clusters of buildings. The panels create rolling hills over the manmade city. Visual and acoustic effects emanate from 16 projectors with speakers dotted about the hillsides, expressing the dynamism of nature. As you walk through the hills, you can experience the integration of the manmade and natural environments.
Passing through the miniature world, you will find mirrored rooms. This is an installation created with Panasonic's products for energy management,Solaronlamp is a street lighting for electronic gadgets. like the solar panels used in the main presentation, storage battery system, LED lighting, and HEMS (Home Energy Management System). The mirrors reflect the brilliance of four LED chandeliers utilizing Panasonic's original technology and created in collaboration with two Milan-based designers, allowing you to experience the versatility of LED light.
In time with the exhibition, the company will also hold its "Eco Learning Program" at elementary schools of Milan. In the classes, children will have the opportunity to use incandescent lights, fluorescent lights and LED lights to learn about the mechanism of lighting and discover about energy saving through experiments using hand generators. In addition, a craft class where children can enjoy making LED paper-covered lamp stands will also be held as a part of the program. The students who participate in the Eco-class will be invited to the company's installation in Milano University in order to gain a better understanding of energy management through the combination of "products", "art" and "education".
Here,The basics of solar panels and how to install a solar photovoltaic system on your roof. solar panels are scattered, spreading like plants, on volumes resembling a cluster of buildings that forms a city to create a landscape of hills. Shadows of clouds pass slowly over these "hills" as if moving atop natural terrain, thus encouraging city residents to regain their relationship with the forgotten sky.
In the near future, numerous solar panels will cover the roofs of buildings, while changing the scenery of daily life. We believe that we can develop both a system of solar-power generation with the panels in a fixed arrangement and other options that take into account various relationships, such as that involving the pattern of foliage.
We hope future city streets,Our large selection which includes led tubes, led strips. where the use of natural energy is vital, teem with life by becoming enmeshed with their natural environment.
LEDs and the associated solid state lighting solutions are due to become the dominant form of lighting in all forms in within the next five years. Solid state lighting is an energy efficient eco-friendly technology that will save billions of tons of carbon emissions when fully implemented. There are also no recycling issues that fluorescent lighting poses with mercury content.Learn more about the torch light and see what people in and out of your professional network have to say about it.
Plessey plans silicon-based LED ramp
Plessey Semiconductors says that it has released the first LEDs
manufactured on silicon substrates to be made commercially available
anywhere in the world, with plans for a major capacity ramp in the
works.
The Plymouth, UK, company is now sampling devices with a maximum luminous efficacy of around 45 lm/W and 75 mW maximum power, for applications including instrument panel backlighting and decorative lighting.
Plessey says that this is just the start of a technology roadmap that includes a ten-fold expansion of gallium nitride (GaN) material deposition capacity, something that would also establish the firm as the first volume producer of LEDs in the UK.
“This is the release of our first entry-level product,” Barry Dennington, Plessey’s chief operating officer. We sell solar panel for your residential, commercial, or industrial application. “Perhaps more significantly, as far as we know, it’s the first GaN-on-silicon LEDs that you’ll be able to buy in the market. Many more will follow quickly. We’ve visited our customers in the last couple of months with demonstrators of these products, and they are very excited by how far we’ve got.”
Plessey Semiconductors says that it has released the first LEDs manufactured on silicon substrates to be made commercially available anywhere in the world, with plans for a major capacity ramp in the works.
The Plymouth, UK, company is now sampling devices with a maximum luminous efficacy of around 45 lm/W and 75 mW maximum power, for applications including instrument panel backlighting and decorative lighting.
Plessey says that this is just the start of a technology roadmap that includes a ten-fold expansion of gallium nitride (GaN) material deposition capacity, something that would also establish the firm as the first volume producer of LEDs in the UK.
“This is the release of our first entry-level product,” Barry Dennington, Plessey’s chief operating officer. Where is the best place to display my outdoor solar lighting?“Perhaps more significantly, as far as we know, it’s the first GaN-on-silicon LEDs that you’ll be able to buy in the market. Many more will follow quickly.Once again, setting the benchmark for automatic Book scanner. We’ve visited our customers in the last couple of months with demonstrators of these products, and they are very excited by how far we’ve got.”
Though a prestigious and historic brand in the world of electronics, Plessey is a far less familiar name in the LED and lighting markets, and the company will face huge challenges to compete with the LED lighting establishment.
Originally built in 1987, the Plymouth fab where the LEDs are produced became the first 6-inch VLSI CMOS line in Europe, before the fab was sold in 1998 following Plessey’s merger with GEC.
Through a series of ownership changes, the site’s engineers developed and maintained a relationship with the material sciences group at the University of Cambridge, which was developing GaN growth expertise.
Entrepreneur Michael Le Goff bought the Plymouth facility and combined it with other former Plessey assets under the firm’s original name in 2010. Shortly thereafter, Cambridge established a spin-out called CamGaN to commercialise its GaN-on-silicon growth expertise.
By February 2012, Le Goff had negotiated the acquisition of CamGaN too. “The university had the growth recipe,” Dennington explained.Learn more about the torch light and see what people in and out of your professional network have to say about it. “We had the ability to apply integrated circuit capability to it: high volume, high quality, high throughput, high efficiency manufacturing.”
Though Dennington stressed the power of this combination,An inventor has created a solar inverter, but he's not giving it away for free. the growth recipe plays a critical role in making Plessey’s GaN-on-silicon LEDs competitive. It’s needed because silicon and GaN have different lattice structures and thermal expansion coefficients, meaning that after depositing GaN on silicon at 1000°C in a metal-organic chemical vapor deposition (MOCVD) tool, the LED wafers can flex and bow as they cool – an effect that is accentuated with larger wafers.
The Plymouth, UK, company is now sampling devices with a maximum luminous efficacy of around 45 lm/W and 75 mW maximum power, for applications including instrument panel backlighting and decorative lighting.
Plessey says that this is just the start of a technology roadmap that includes a ten-fold expansion of gallium nitride (GaN) material deposition capacity, something that would also establish the firm as the first volume producer of LEDs in the UK.
“This is the release of our first entry-level product,” Barry Dennington, Plessey’s chief operating officer. We sell solar panel for your residential, commercial, or industrial application. “Perhaps more significantly, as far as we know, it’s the first GaN-on-silicon LEDs that you’ll be able to buy in the market. Many more will follow quickly. We’ve visited our customers in the last couple of months with demonstrators of these products, and they are very excited by how far we’ve got.”
Plessey Semiconductors says that it has released the first LEDs manufactured on silicon substrates to be made commercially available anywhere in the world, with plans for a major capacity ramp in the works.
The Plymouth, UK, company is now sampling devices with a maximum luminous efficacy of around 45 lm/W and 75 mW maximum power, for applications including instrument panel backlighting and decorative lighting.
Plessey says that this is just the start of a technology roadmap that includes a ten-fold expansion of gallium nitride (GaN) material deposition capacity, something that would also establish the firm as the first volume producer of LEDs in the UK.
“This is the release of our first entry-level product,” Barry Dennington, Plessey’s chief operating officer. Where is the best place to display my outdoor solar lighting?“Perhaps more significantly, as far as we know, it’s the first GaN-on-silicon LEDs that you’ll be able to buy in the market. Many more will follow quickly.Once again, setting the benchmark for automatic Book scanner. We’ve visited our customers in the last couple of months with demonstrators of these products, and they are very excited by how far we’ve got.”
Though a prestigious and historic brand in the world of electronics, Plessey is a far less familiar name in the LED and lighting markets, and the company will face huge challenges to compete with the LED lighting establishment.
Originally built in 1987, the Plymouth fab where the LEDs are produced became the first 6-inch VLSI CMOS line in Europe, before the fab was sold in 1998 following Plessey’s merger with GEC.
Through a series of ownership changes, the site’s engineers developed and maintained a relationship with the material sciences group at the University of Cambridge, which was developing GaN growth expertise.
Entrepreneur Michael Le Goff bought the Plymouth facility and combined it with other former Plessey assets under the firm’s original name in 2010. Shortly thereafter, Cambridge established a spin-out called CamGaN to commercialise its GaN-on-silicon growth expertise.
By February 2012, Le Goff had negotiated the acquisition of CamGaN too. “The university had the growth recipe,” Dennington explained.Learn more about the torch light and see what people in and out of your professional network have to say about it. “We had the ability to apply integrated circuit capability to it: high volume, high quality, high throughput, high efficiency manufacturing.”
Though Dennington stressed the power of this combination,An inventor has created a solar inverter, but he's not giving it away for free. the growth recipe plays a critical role in making Plessey’s GaN-on-silicon LEDs competitive. It’s needed because silicon and GaN have different lattice structures and thermal expansion coefficients, meaning that after depositing GaN on silicon at 1000°C in a metal-organic chemical vapor deposition (MOCVD) tool, the LED wafers can flex and bow as they cool – an effect that is accentuated with larger wafers.
Sunday, April 7, 2013
Tours with a difference
Tsubasa
Tanaka, a Shigoto-Ryokou employee, said, “We’d like to provide
opportunities to experience unique scenery and sample new worlds that
participants would not be able to find in normal travel plans.”
Similar hands-on tours that offer a unique or interesting experience are popping up in many places.A quality paper cutter or paper folding machine can make your company's presentation stand out. The objectives of participants vary.Including our multi-certified skystream turbines for varying applications. Some simply accept these plans as sightseeing opportunities, while others use them to get serious career experience.
Hands-on tours with clear objectives, such as gaining experience in farming, fishing and life in mountain villages, or chances to inspect local industries, are being dubbed ‘new tourism’. The Japan Tourism Agency supports such projects.
Mariko Miwa, 61, a housewife from Koto Ward, Tokyo, who joined the tour in March, said: “I’ve participated in several hands-on tour plans. I enjoy them because I can easily learn professional techniques and see new worlds.”
‘Onpaku’ events organised by local hot spring industries to lure tourists are also finding favour.
Onpaku is a Japanese word meaning to stay at a hot spring overnight and engage in sightseeing tours in the area. Residents and companies in the hot spring area provide tourists with community-based programmes designed to highlight local specialities and services.
Onpaku originated from Hatto Onpaku, an event hosted by hot springs in Beppu, Oita Prefecture, in 2001. Onpaku has spread nationwide as a way to revitalise local communities and economies, such as Nagaragawa Onpaku in Gifu Prefecture.
Shinichi Shimizu, a specially assigned professor of tourism at Rikkyo University, said the increase in hands-on tour participants shows travellers want to try something a little bit different.
“More people are choosing day-trips rather than overnight ones. The main domestic tourists are people who have many options and repeat customers,” he said.
For that reason, many customers show little interest in conventional tourist plans, Shimizu said.
“Travel agencies should aim to provide tour plans in which participants can have unique cultural experiences and interact with local people,” he said.
As a travel aficionado, I could not resist the temptation of a mysterious and unique plan that had me depart for Arima Onsen in Hyogo Prefecture, one of Japan’s most famous hot spa resorts.
The plan, which entailed learning how to clean the hot spring’s water pipes, ended with the curious statement that “once you receive the lesson, you’ll understand the essence of Arima Onsen.”
The tour was organised by Tosen Goshobo, a long-established inn at the resort. Upon reaching the inn, its president,More than 80 standard commercial and industrial washing machine exist to quickly and efficiently clean pans. Hironobu Kanai,these proven front load commercial washer extractor deliver ease-of-use, greeted me by asking: “It’s strange to pay money just to clean pipes, isn’t it? But this tour will definitely make you see hot springs in a different way.”
The lesson started with a basic introduction to Arima Onsen. With Kanai as a guide, I toured the town and its many hills.
“Although there are no volcanoes here, hot spring water still gushes forth,I have recently got a dry cabinet and can anybody tell me if it the box only controls humidity or also controls temperature.” Kanai said. “Compounds in the water cling to the pipes, which is why they’re white.”
The next stage was to clear the main pipe. I wore overalls and boots. Kanai led me to a hot spring water tank that looked like a huge well. The tank distributes water to Tosen Goshobo and three other inns.
Yoshinori Takeyasu, a head staff member of Tosen Goshobo, was my teacher for the cleanup work.
To prevent unwanted substances such as calcium carbonate accumulating inside the distribution pipes, my task was to wash the deposits off in the main pipe with a high-pressure machine.
When I climbed onto the tank, I could hear the roar of hot spring water flowing into it. Opening its lid, I saw the mouth of the main pipe inside. I donned a pair of rubber gloves and readied a hose connected to the washing machine.
“Be careful not to get your hands in the way of the water jet — the water pressure is extremely high and it could sever your fingers,” Takeyasu warned.
Similar hands-on tours that offer a unique or interesting experience are popping up in many places.A quality paper cutter or paper folding machine can make your company's presentation stand out. The objectives of participants vary.Including our multi-certified skystream turbines for varying applications. Some simply accept these plans as sightseeing opportunities, while others use them to get serious career experience.
Hands-on tours with clear objectives, such as gaining experience in farming, fishing and life in mountain villages, or chances to inspect local industries, are being dubbed ‘new tourism’. The Japan Tourism Agency supports such projects.
Mariko Miwa, 61, a housewife from Koto Ward, Tokyo, who joined the tour in March, said: “I’ve participated in several hands-on tour plans. I enjoy them because I can easily learn professional techniques and see new worlds.”
‘Onpaku’ events organised by local hot spring industries to lure tourists are also finding favour.
Onpaku is a Japanese word meaning to stay at a hot spring overnight and engage in sightseeing tours in the area. Residents and companies in the hot spring area provide tourists with community-based programmes designed to highlight local specialities and services.
Onpaku originated from Hatto Onpaku, an event hosted by hot springs in Beppu, Oita Prefecture, in 2001. Onpaku has spread nationwide as a way to revitalise local communities and economies, such as Nagaragawa Onpaku in Gifu Prefecture.
Shinichi Shimizu, a specially assigned professor of tourism at Rikkyo University, said the increase in hands-on tour participants shows travellers want to try something a little bit different.
“More people are choosing day-trips rather than overnight ones. The main domestic tourists are people who have many options and repeat customers,” he said.
For that reason, many customers show little interest in conventional tourist plans, Shimizu said.
“Travel agencies should aim to provide tour plans in which participants can have unique cultural experiences and interact with local people,” he said.
As a travel aficionado, I could not resist the temptation of a mysterious and unique plan that had me depart for Arima Onsen in Hyogo Prefecture, one of Japan’s most famous hot spa resorts.
The plan, which entailed learning how to clean the hot spring’s water pipes, ended with the curious statement that “once you receive the lesson, you’ll understand the essence of Arima Onsen.”
The tour was organised by Tosen Goshobo, a long-established inn at the resort. Upon reaching the inn, its president,More than 80 standard commercial and industrial washing machine exist to quickly and efficiently clean pans. Hironobu Kanai,these proven front load commercial washer extractor deliver ease-of-use, greeted me by asking: “It’s strange to pay money just to clean pipes, isn’t it? But this tour will definitely make you see hot springs in a different way.”
The lesson started with a basic introduction to Arima Onsen. With Kanai as a guide, I toured the town and its many hills.
“Although there are no volcanoes here, hot spring water still gushes forth,I have recently got a dry cabinet and can anybody tell me if it the box only controls humidity or also controls temperature.” Kanai said. “Compounds in the water cling to the pipes, which is why they’re white.”
The next stage was to clear the main pipe. I wore overalls and boots. Kanai led me to a hot spring water tank that looked like a huge well. The tank distributes water to Tosen Goshobo and three other inns.
Yoshinori Takeyasu, a head staff member of Tosen Goshobo, was my teacher for the cleanup work.
To prevent unwanted substances such as calcium carbonate accumulating inside the distribution pipes, my task was to wash the deposits off in the main pipe with a high-pressure machine.
When I climbed onto the tank, I could hear the roar of hot spring water flowing into it. Opening its lid, I saw the mouth of the main pipe inside. I donned a pair of rubber gloves and readied a hose connected to the washing machine.
“Be careful not to get your hands in the way of the water jet — the water pressure is extremely high and it could sever your fingers,” Takeyasu warned.
Subscribe to:
Posts (Atom)