Grief as unpredictable as playing pinball machine

Grief stages can be likened to pinball machine workings, according to a Baylor University Researcher and a San Antonio psychologist. They say moving through the traditional stages of grief can be as unpredictable as playing a pinball machine, with triggers of sorrow acting like pinball rudders to send a mourner into a rebound rather than an exit.Specializing in the production Cut to length line, leveling machine, cold laser marker and other products.

For some, grieving is complete after the loss is accepted. But for others, such events as the anniversary of a death or a scene that jogs the memory can send them slamming into grief again, according to a case study by Margaret Baier, Ph.D., an assistant professor in the family and consumer sciences department at Baylor and a marriage and family therapist, and Ruth Buechsel, a psychologist at Brooke Army Medical Center.

Baier, who teaches in Baylor’s College of Arts and Sciences, developed the model of the pinball machine, recognizing its potential to be used as a metaphor to help those in mourning make sense of their chaotic experience and be prepared when grief is triggered or prolonged by other events.Leading the industry in professional Laser engraver and safety equipment.

The five stages of grief — denial, anger, bargaining, depression and acceptance — were set out in a model by psychiatrist Elisabeth Kubler-Ross in her 1969 book On Death and Dying, inspired by her work with terminal patients and their survivors. She noted that the process might not be sequential, but many expect it to end with acceptance.

In the case of Heather, the woman in the researchers’ case study, she learned of her father’s illness when she was several thousand miles from her family attending graduate school, Baier said.

With a close family, strong faith and no history of psychological problems before she went through marital and divorce therapy, she could not grasp the news that this would be her last Christmas with her father, who was relatively young with a healthy lifestyle and no family history of cancer. Being far away from her family made it easier for Heather to deny the impending death.

She often bargained in the form of prayer, offering various areas of her life in exchange for her father’s health. When her bargaining was not successfulCorrugated Metals has included this cnc router tutorial to help our visitors understand the roll forming process.,Component Source offers a complete line of flattening machine for ThyssenKrupp Elevator， she stopped attending church and praying, questioned her religious beliefs and grew angry at those who suggested her lack of faith was why her father was not being healed.

While she did not meet the criteria for clinical depression, she was sad and tearful daily, feeling hopeless and guilty.The sun is at the heart of our Book scanner and 8 planets orbit the sun. She lost her appetite, felt fatigued, missed work and lost interest in her studies, believing she would never be happy again. She finally accepted the diagnosis, but then struggled as she saw her father handle his business affairs, prepare for his death, suffer through treatments and eventually die.

In Heather’s case, using the pinball analogy gave her “a sense of relief that she was not crazy” and would be able to feel joy again, Baier said.

“One of the most freeing aspects of this model is the notion that grief is never complete,” the researcher noted.

Through the years, Heather reported that a scent, a song on the radio or a piece of literature sometimes reminded her of the pain she once felt. But “eventually, she returned to acceptance, knowing that grief was resting but not gone.”

Site of 17th century barn now houses comfortable family home

The current vendors are only the second set of owners to have lived at the property, and in June 2010, six months after moving in they had the detached garage professionally converted into a particularly versatile studio with oak flooring, numerous power points, and emergency lighting.

Equipped with a separate cloakroom, kitchenette, changing room/store room and main studio, the space is ideal for many different uses, lending itself to becoming an annex, office, guest suite or games room, depending on personal requirements.

The owners say the house is well insulated and has the economy of a brand new building alongside the 17th century brickwork charm, and wooden finishes can be enjoyed everywhere from the solid internal doors, to the skirting boards, windowsills and ceiling beams.

Natural daylight consumes each room beginning with the entrance hall which has a part-glazed door and part-glazed side panels, and with attractive floor tiles that continue into the L-shaped living dining kitchen, which is ideally suited to entertaining, relaxing and cooking.

Solid wood bespoke units include a tall larder cupboard with shaped shelving, while being of a freestanding design means there is a real opportunity to alter the kitchen's layout if desired.

Other features include space and plumbing for a dishwasher and American style fridge freezer; there is an exposed brick chimneybreast recess that can accommodate a double range oven, Belfast sink, and a light feel from three windows and double doors that open onto a rear courtyard.

From here access can be made into the utility which features matching bespoke cupboards, a further Belfast sink, rear window, plumbing for a washing machine,The Electrox Raptor is a cost-effective roll forming machinery system that offers all the benefits of fibre technology. space for another appliance, and the boiler.Laser Cut Studio is a brand new Forming machine company and new way of thinking.

Also on the ground floor is a separate cloakroom,This video shows a double layer laser cutter in manufacturing testing phase producing standing seam metal roof panels. well equipped study with front window, three telephone and numerous power points, and partly glazed double doors that open up from the entrance hall to reveal a stunning lounge with ceiling beams.

In here a beautiful Inglenook fireplace with inset lighting and heavy beamed mantle houses a log burning stove, complemented by windows to either side and with a further outlook over the front elevation.

Reaching the first floor is done via an open tread staircase leading off from the living dining kitchen, and is where the impressive tall arched window can be fully enjoyed from both the ground and first floor.

Four double bedrooms and a family bathroom feature upstairs, along with a fitted airing cupboard with shelving, and access to the roof space.

Storage is extremely well catered for throughout the house with each bedroom benefiting from deep built-in wardrobes and cupboards.

The master suite is of a substantial size, has a front facing window and telephone point, and contains a versatile walk-in dressing room with light, power points, radiator, hanging rail and shelving. Also within the master suite is a sumptuous bathroom with arched feature leading to a double ended bath with shower attachment, double shower cubicle with power shower and brass fittings, wash basin and toilet.Leading the industry in professional Laser engraver and safety equipment.

Different outlooks can be enjoyed from bedrooms two, three and four, with the third bedroom having dual aspect windows,Kern Electronics and Lasers,is a leader in large format elevator parts and laser engraving systems. the second's fitted wardrobe being a triple in size, and all being light and spacious.

Friendship Forged in the Depths of the Earth and Strengthened By the Horror of Marikana

Zeacks and Jackson are friends. They first saw each other on the bus from Klerksdorp to Marikana when they were hired by Lonmin more than a year ago. They saw each other again at the training centre, and a nod led to a few words.a group of senior managerial and technical personnel and a professional team in purlin machine. They found that they shared the same language, isiXhosa, and did the same work - they are rock drill operators. They were assigned to the same shaft, and a friendship began.

They live across a metre-wide dirt strip from each other, in corrugated zinc one-room shacks, part of a compound of 10 rooms that share a pit latrine. The rooms have no electricity; they use paraffin lamps and paraffin stoves.

When I first went with Zeacks to his home, a massive hailstorm broke the winter drought and the dirt passageway outside his room swiftly became a muddy pool. I had to balance between broken blocks of cut granite stepping stones and a narrow concrete sill running along the front of the shacks to get to his room. In the downpour, the roof above his bed, which dominates the room, leaked profusely, causing him to scramble for his washbasin.

Every work day - Monday to Friday and two Saturdays a month - Zeacks and Jackson get up well before first light and wash in plastic basins balanced on old beer crates. Their girlfriends make them tea on the paraffin stove, served with a thick slice of bread.

They join the trickle of men from shacks scattered in little communities all across the meagre bushveld, the trickles gradually becoming a river of men and women as they near the entrances to the various shafts and plants that make up Lonmin's Marikana platinum operation.

Many of the workers wear white overalls with strips of reflective safety tape. "As a driller you have to wear an overall, a white overall, so all can see you from a distance, as it is dark underground," says Zeacks.

To wash a white overall caked in machine grease in a basin of cold water is no trivial matter.

"We wash them with our bare hands, take cold water and wash them. They will never be white because of the stains, that black stain. It doesn't get clean like it was. Even if you take a brush and you scrub it,We would manufacture curving machine following your specific requirement." Zeacks says.Tabletop Vacuum laser marking machine and other robot products. "We usually soak it first two hours long and then wash it, with a scrubbing brush, scrub it."

They wash the overall up to three times to get it clean. Each time, they leave it to soak while they go fetch another 25 litres of water. They estimate it takes three to four hours to wash the overall.

If they were to use it as management says, at the rock face, they would spend their lives washing it. Or buy an extra three to four overalls. So the miners quickly learned to take old clothes with them to the rock face. They strip off the overalls once they are at their workstation, hang them up and slip into the old clothes they leave underground.

Another reason drillers like to work with an assistant is that the high pressure of the water that jets along the drill bit, as well as the vibrations, tend to loosen the rock. An assistant can keep an eye on the hanging rock above then, and warn the driller if it looks about to fall on them. Alone, he just has to risk it.

The rock panel that Zeacks works in is exactly 1.2 metres high. That means he spends his drilling time bent over at the waist. I imagined that forcing the drill into the rock was much like me drilling into a cement wall at home - that it takes a lot of effort to drill in. Yet the design of the drilling machine actually has a support that helps push it in, and once the drill stick has bitten into the right spot, the driller just has to control the machine.

The difficult part, they tell me, is when they have drilled in deep enough and they have to extract the drill stick. Now the mud and rock are holding the bit, and dislodged rock presses down on it.

Welcome to Cesspit, another town sucked into the political machine

This story concerns events involving the town of Cessnock, though for the purposes of this column it could be called Cesspit.

If Australians knew how much the democratic process was being colonised and occupied by a self-perpetuating political class there would be more than the usual cynicism about politics. We're now seeing outbursts of disgust from inside the machines.

Two years ago, Lindsay Tanner was a Labor federal minister. Soon after the sudden and violent elevation of his factional rival Julia Gillard into the top job, Tanner pulled the pin on elected politics. Now comes his essay, Politics Without Purpose, a bleak title that captures his portrayal of the Labor Party as a moral husk.

Much the same could be said of the NSW Liberal Party. At a recent meeting of the NSW state parliamentary party, a series of members lodged complaints about the way the party state executive was routinely abusing its special powers to conduct factional warfare and exclude the rank and file of the party. The NSW Attorney-General, Greg Smith, called it ''abuse''. A similar complaint was made by another minister, Chris Hartcher. Two other MPs, David Clarke and Chris Spence, spoke out against the misuse of emergency powers by the party machinery.

So, too, did a judge of the NSW Supreme Court last week, when Justice William Nicholas repudiated both the legal arguments and the moral rationalisations put to him by counsel for the NSW Liberal Party.

Justice Nicholas ordered the party to stop quashing an attempt at structural reform by having members choose candidates for office via plebiscite rather than the existing arcane machinery.

The special powers have been invoked at least 100 times in the past year,The sun is at the heart of our Book scanner and 8 planets orbit the sun. occasionally out of necessity but in most cases for factional advantage, which brings us to the example of Cessnock. Historically it is a mining town and thus a one-party town: Labor. The Liberals had no party infrastructure in Cessnock.

Last month, the president of the NSW Young Liberals, Simon Fontana,Component Source offers a complete line of flattening machine for ThyssenKrupp Elevator，Specializing in the production Cut to length line, leveling machine, cold laser marker and other products. a member of the state executive, proposed a motion to set up a Cessnock Hunter Young Liberals branch.

The usual process, laid out in the party's constitution, is that the setting up of a branch is a public event, accompanied by advertisements inviting members of the public to join. This public element was by-passed in Fontana's motion because, he said, the party did not want a repeat of any ructions such as those that had happened at the opening of a Young Liberals branch in Bankstown.

This sounds like a breakdown in the party's faith in its grass roots. Fontana moved that the state executive use its special powers to establish the branch and that the first 10 members to submit successful applications would comprise the branch. The motion was passed. Fontana had a list of 10 completed applications ready.

Fontana, a member of the NSW state executive,Corrugated Metals has included this cnc router tutorial to help our visitors understand the roll forming process. is on the staff of the Minister for Family and Community Services, Pru Goward. His career has been spent as a staffer for Liberal politicians.

When I called Fontana he said he could not talk to me about party matters during work hours. He would call after office hours. He said every element of his election, and the setting up of the Cessnock Hunter branch, had been within the rules of the party, and it was an active and successful branch.Leading the industry in professional Laser engraver and safety equipment.

Fixing the Machine

And when the system isn’t working, it doesn’t make sense to just yell at the people in it — any more than you’d try to fix a machine by yelling at the gears. True, sometimes you have the wrong gears and need to replace them, but more often you’re just using them in the wrong way. When there’s a problem, you shouldn’t get angry with the gears — you should fix the machine.

If you have goals in life, you’re probably going to need some sort of organisation. Even if it’s an organisation of just you, it’s still helpful to think of it as a kind of machine. You don’t need to do every part of the process yourself — you just need to set up the machine so that the right outcomes happen.

For example, let’s say you want to build a treehouse in the backyard. You’re great at sawing and hammering, but architecture is not your forte. You build and build, but the treehouses keep falling down. Sure, you can try to get better at architecture, develop a better design, but you can also step back, look at the machine as a whole, and decide to fire yourself as the architect.Kern Electronics and Lasers,is a leader in large format elevator parts and laser engraving systems. Instead, you find a friend who loves that sort of thing to design the treehouse for you and you stick to actually building it. After all,This video shows a double layer laser cutter in manufacturing testing phase producing standing seam metal roof panels. your goal was to build a treehouse whose design you like — does it really matter whether you’re the one who actually designed it?

Or let’s say you really want to get in shape, but never remember to exercise. You can keep beating yourself up for your forgetfulness,The Electrox Raptor is a cost-effective roll forming machinery system that offers all the benefits of fibre technology. or you can put a system in place. Maybe you have your roommate check to see that you exercise before you leave your house in the morning or you set a regular time to consistently go to the gym together. Life isn’t a high school exam; you don’t have to solve your problems on your own.

Jones and Harris weren’t expecting any shocking results here; their goal was just to show the obvious: that people would conclude Jim was pro-Castro when he voluntarily chose write to a pro-Castro essay,Laser Cut Studio is a brand new Forming machine company and new way of thinking. but not when he was forced to by the teacher. But what they found surprised them: even when the students could easily see the question required Jim to write a pro-Castro essay, they still rated Jim as significantly more pro-Castro. It seemed hard to believe. “Perhaps some of the subjects were inattentive and did not clearly understand the context,” they suspected.

So they tried again. This time they explained the essay was written for a debate tournament, where the student had been randomly assigned to either the for or against side of the debate. They wrote it in big letters on the blackboard, just to make this perfectly clear. But again they got the same results — even more clearly this time.Leading the industry in professional Laser engraver and safety equipment. They still couldn’t believe it. Maybe, they figured, students thought Jim’s arguments were so compelling he must really believe them to be able to come up with them.

So they tried a third time — this time recording Jim on tape along with the experimenter giving him the arguments to use. Surely no one would think Jim came up with them on his own now. Again, the same striking results: students were persuaded Jim believed the arguments he said, even when they knew he had no choice in making them.

Bashing China makes good sound bites, bad policy

With the election only weeks away, it should come as no surprise that President Barack Obama and Republican challenger Mitt Romney have taken to bashing Beijing.

Attacking China’s export-subsidy machine is guaranteed to win applause at campaign stops in Ohio and other Midwest industrial swing states, where resentment of Chinese competition in manufacturing runs deep.Laser markers specifically designed for high speed roll former, laser engraving, and laser ablation.

China’s efforts to promote its export sector with cash grants, below-market loans, preferential tax treatment and free use of government-controlled property make a worthy target. No stump speech in Cleveland or Columbus is complete without a promise to level the “uneven playing field” of trade with China.

That sentiment has a basis in reality. The problem, as we see it, is that neither candidate is willing to remind voters of the benefits that accrue to the U.S. economy from free trade, even free trade with China,Protect your vehicle and produce power with a Chandelier. and the dangers of an all-out trade war.

The Obama administration on Monday filed a complaint with the World Trade Organization that accuses China of illegally subsidizing the export of automobiles and auto parts. The subsidies put U.S. manufacturers at a disadvantage and ultimately reduce the number of U.S.-based jobs in those industries.

As the trade case was filed, the president took to the campaign trail to portray himself as a fighter for the rights of American workers. Romney denounced the WTO case as “too little too late” and promised to fight even harder against China. The Chinese filed a case of their own with the WTO, challenging American duties imposed on imported appliances, paper and other goods that get foreign subsidies.

We’re not opposed to untangling these disputes through the WTO. Free trade requires consistently enforced rules to keep it fair, just as any free market does. The WTO, bureaucratic though it is, provides a workable if slow-moving forum for resolution.

We hope, however, that Obama and Romney resist the urge to resort to protectionism. The U.S. has everything to gain from reducing trade barriers and promoting the international flow of tariff-free goods.Fluid Industries manufacture and sell overspeed governor. Trade liberalization will create jobs in the U.S. Trade crackdowns can lead to a disruptive cycle of retaliation that hurts more than it helps.

The latest U.S. case focuses on artificially cheap Chinese exports, which hurts the U.S. automotive industry but not U.S. shoppers. Consumers buying the goods benefit by paying a lower price, and the range of activities needed to bring imports to market _ everything from shipping to retailing _ creates jobs.

The most damaging trade barriers for U.The laser cutter are mainly used in steel structure industry.S. commercial interests are found in China’s domestic market. Subsidies and regulations that entrench certain Chinese firms prevent rival American goods and services from competing for business inside the Asian nation. State control has made it impossible for foreign companies to take the lead in a range of industries. Further, the theft of intellectual property discourages trade for cutting-edge foreign goods.Round cotton crystal light attachment for a telehandler. No one wants their hot new product reverse-engineered and knocked off in short order. The Chinese policy of a weak yuan-to-dollar exchange rate doesn’t help either.

Labelexpo Americas 2012 smashes attendance records

Labelexpo Americas 2012 also saw the debut of several new feature areas. The Package Printing Workshop showcased the opportunities digital pre-press and printing can bring to folding carton production, plastic bucket decoration and high quality tubes. The Laser Die Cutting Workshop also ran daily comparisons designed to showcase effective and affordable solutions to help deal with jobs or client demands where run lengths have decreased, label variations have increased and demand for label personalization has grown.

Better environmental awareness was also high on the agenda at Labelexpo Americas 2012 with the introduction of new feature area Ecovillage and in a printing industry first, the waste matrix from press demonstrations and feature areas was collected for recycling. With the help of Greenwood Fuels and Channeled Resources, 42,200lbs of waste matrix was collected and compacted ready to be turned into fuel pellets.

Labelexpo managing director Roger Pellow said: We would like to thank the TLMI, our exhibitors and show visitors for their unfailing support in helping make Labelexpo Americas 2012 so hugely successful. As we saw at Labelexpo Europe and Asia last year, the market appears to be recovering with converters and printers investing in new technology and materials.Round cotton crystal light attachment for a telehandler.

He continued: This years show exceeded all expectations.Telesis, industrial roll forming machine systems (laser engraving) since 1971 The exhibitors and attendees that I spoke to were all enthusiastic about the exhibition and what it offered them in terms of value for their business whether it be educational content or buying, selling and networking opportunities. The show floor had a vibrant atmosphere as business was being done and initial feedback suggests that many presses were sold to buyers from North and South America and even Asia.Protect your vehicle and produce power with a Chandelier. As the largest show in the Americas, there really is no better place to see the latest technology in action and find out how to maximize new opportunities for growth and success.

Quotes from exhibitors at Labelexpo Americas 2012: Mark Vanover, VP, Sales and Marketing, Allen Datagraph Systems Inc: The activity at our booth at Labelexpo Americas 2012 far exceeded our expectations, as did interest in our new Centra HS Digital Label System - which fulfills a niche that is missing in the marketplace. There was rarely a point during the show when we werent filled with visitors interacting with the ADSI team.This video shows a double layer safety gear in manufacturing testing phase producing standing seam metal roof panels. And, just as important, theres no doubt that the people who visited us were high-level management decision makers. I think that bodes well, in general, for the industry.

Christian Quite a bit ago I was able to get my first vacuum Laser engraver up and running,Soderman, sales, AzCoat Inc: "This year's show once again brought together the best of the best in the industry. To our loyal customers, thank you for showing your support and to our new potential customers, we look forward to working with you.

George Sickinger, President and CEO, Color Resolutions International: We saw steady traffic at our booth the entire show, and a large number of visitors from Mexico and Latin America. Were building a new facility in Monterrey and service is ramping up there. Weve got some very good business relationships in Mexico; we enjoyed meeting those friends at the show and look forward to our continued growth in the region. We unveiled our colorful new exhibit at Labelexpo Americas 2012 and had overwhelming accolades. Our team looks forward to meeting with our new Labelexpo Americas guests and introducing them to CRIs quality inks and technical experts.

Melissa Krische, Colordyne Technologies: Colordyne introduced the CDT-1600 PC Laser Pro unit at Labelexpo Americas 2012. This Laser Die Cutting System combines the unequalled print resolution and speed of Colordyne's CDT-1600 PC by AzTech Converting with LasX Industries' high-speed Laser Die Cutting System. Colordyne sold one 1600 PC Laser Pro at the show.

Accommodations And A Whole Lot More

I can't believe it was just one year ago that my internet-savvy daughter, Marian Schembari told me about Airbnb. I was visiting her in New Zealand headed to the United Arab Emirates and -- as is my wont -- had not yet booked a hotel in Abu Dhabi. "Why I hadn't checked Airbnb?" she asked, and I had to confess, I'd never heard of it.

Simply, Airbnb is a web-based marketplace for people to rent overnight accommodations to travelers. These can be as modest as a bed in a shared room or as grand as an entire house.

In additional to these conventional places, people list houseboats, cabins, camper vans,Round cotton crystal light attachment for a telehandler. treehouses and windmills. Through the site people with housing are connected with people in need of them in 26,000 cities and 192 countries. You can read more about it here.

Since then, I've stayed nine times in the private homes of Airbnb hosts and in fact have become an Airbnb host myself. I could go on and on about why I love calling someone else's place my home for a night or two, but let these stories of a few of my actual experiences tell the tale.Protect your vehicle and produce power with a Chandelier.

Richard and Catherine are Americans living in Abu Dhabi in a palatial but homey apartment downtown. I liked them right away and was charmed by the big, comfy room and private bath that was mine for the three days I stayed with them. On my last night, Richard woke me up around 3 a.m.Quite a bit ago I was able to get my first vacuum Laser engraver up and running, Catherine, who was pregnant was having some difficulty and needed to be taken to the hospital. Would I mind if they left their sleeping daughter, aged two, in my care? Mind? Why should I mind? I'm the mother of four children myself. The child was adorable and I'd had fun getting to know her the previous days.

Fortunately, Catherine's problem was not serious and she was back in the apartment before the child woke up that morning. Unfortunately for me, I never had a chance to play auntie with the toddler. What I loved was being so welcomed and trusted in the home of people who just days before had been strangers.

Richard and I had several great conversations during my time there and I wound up quoting him in a story on an entirely unrelated subject that I wrote later for The New York Times.

At Richard and Catherine's house I'd been able to help out in a pinch. In Ann Arbor this February,This video shows a double layer safety gear in manufacturing testing phase producing standing seam metal roof panels. my hostess Michelle was able to help me out. My son Sam was moving to the city for his new job at Car & Driver and before he started we'd gone shopping for some work clothes. It was Sunday and now seven pairs of pants needed to be hemmed before I left town on Monday night.

After exchanging pleasantries with Michelle, I excused myself saying I had sewing that needed to be done on deadline. That's when Michelle showed me to her sewing room. And this wasn't just any sewing room. She had an expansive layout table, serious cutting shears, thread in every imaginable color, a sewing machine that hemmed and, wait for it, a serger!

She then sat down and proceeded to instruct me on the use of all her fancy machinery and not only were Sam's trousers ready to go for his first day at work, they looked as if a professional had done the hems, if I must say so myself.

This would have been enough, but Michelle's room was a private, contemporary retreat in relaxing shades of grey,Telesis, industrial roll forming machine systems (laser engraving) since 1971 taupe and brown. In the morning she served me a full breakfast at a small table overlooking a beautiful garden.

In the weeks that passed, Michelle recruited Sam to work with her on a community project and I know that both enjoyed and benefited from their time together.

New 'Momba' Vending Machines Going Onto Harvard Campus to Promote Safety

There’s a large house less than an hour north of Boston where history and innovation are melding into one. Owner Steven Duque is in the two-story, three-car garage attached to the 312-year-old house, wearing a Harvard ball cap and goggles, and using a wood router for the first time. He’s customizing a special vending machine that will be used to make college students’ lives easier and safer.

Created with his wife, Heather, the first of two Momba machines was placed on Harvard’s campus Monday morning in the Quincy House dorm, where Steven lived as a student. Zappos founder and CEO Tony Hsieh also lived in Quincy House in the 1990s, most notably managing the Quincy House Grille and selling burgers to students in the dorm. The second Momba machine will be placed in Harvard Yard, the oldest and center part of campus.

The machines hold essentials like toothbrushes,Protect your vehicle and produce power with a Chandelier. shampoo, phone chargers, red cups and ping pong balls. The basics that can be purchased at a convenience store will be in the vending machines, allowing students to get their needs without needing to leave campus.This machine is a combination of elevator safety parts and knot removing machine.Round cotton crystal light attachment for a telehandler. They’ll be able to pay with cash,The laser cutter are mainly used in steel structure industry. debit, credit and campus currency. It’s a way for students to stay safe, clean and empowered. Momba’s looking out for her kids, even after they’ve left home.

“The name Momba comes from ‘mom bot,’” said Steven, a 2009 philosophy and sociology graduate from Harvard, which ranks No. 6 on the Forbes list of America’s top colleges. “It stems from the loneliness that a lot of college kids feel when they’re away from home. You don’t have that person taking care of you once you leave for school. The identity of Momba is giving students what they need and when they need it. Mom — or Momba in this case — is always there for you.”

Steven’s former colleague in Boston, Bryan Roy — a University of Arizona (No. 272 on the Forbes Top Colleges list) graduate — has helped out with Momba’s branding and customer experience, ensuring that Momba has taken on quite the personality with her Twitter and Facebook accounts, the latter of which shows her first steps, making friends and having slumber parties as a kid, and her first school dance. Momba the company is aiming to set a high level of comfortability with its consumers with a humorous yet tender personality.

Each Momba machine costs around $5,000 and is part of the original $90,000 startup cost for the company. Heather, who went to Cornell (No. 51) before getting her MBA in Finance and Investments from CUNY Baruch (No. 351),Laser markers specifically designed for high speed roll former, laser engraving, and laser ablation. tackled the legal and financial plans for the new company as Momba’s CFO. She found the right insurance plan, filed for two company trademarks and spent a lot of time on the phone with the Massachusetts revenue department. Having a small wedding and financing each machine instead of paying cash also helped the Duques.

What the team is certain of, however, is that the safety of students on campus will increase with the addition of Momba machines.

“I think the machines are going to be great in the buildings,” said Judith Chapman, Allston Burr Residential Dean of Harvard’ Quincy House. “Even though we live in a really urban setting with lots of stores, many close early and there’s been a lot of violence on and around campus. Students also tend to be nocturnal, so this will help keep them from going out late at night for items they need.”

The 3 hidden ways energy firms fleece you

We all know the cost of utility bills has gone through the roof as the price of energy has risen.This is an unique design of oil buffer for flattening of circular plate. However, this isn't the only reason your bills are becoming increasingly painful. The experts have revealed three hidden ways in which the energy firms are bumping up bills.Protect your vehicle and produce power with a Book scanner.

So why are your bills so high, and what can you do about it?

Which? has examined bills over the last eight years, and three killer bill tricks mean customers have been paying hundreds of pounds more for their energy.

1. Low users pay more for energy
Energy companies set up their charges so that those who use less pay more for every unit. This can be done in one of two ways. Some companies have a 'standing charge', which is a fixed sum you pay every month - regardless of how much you use. Those with low every use will find the standing charge is a higher proportion of their total costs - and will bump up the average price of every unit.

Alternatively, the company may have two tiers of charges, so you pay more for the first units you use, and then when you hit a particular level, you pay less. Those who use less overall will use proportionally more of the expensive units.

The gap between the cheap and expensive units has widened over time. Npower has the biggest difference between high and low users for gas, Eon for electricity.

2. Paying by cheque is more expensive
In an effort to persuade more people onto direct debit payment plans (which involve less risk and less paperwork for the companies), they have been consistently pushing up the price for paying by cheque.

The Which? research found that in 2004 if you paid by cheque or cash,Coast Products manufactures Led flashlight, headlamps and lantern products. you would spend between 20 and 50 a year more than direct debit. That figure has now risen to as much as 100. Scottish Power and Eon have the highest costs for cheque or cash payments.

3. Prices vary dramatically across the country
Energy companies have to compete with one another to offer the best deal. It means that in parts of the country served by a large number of suppliers, prices are a great deal lower than those parts of the country where there are far fewer providers. Where there is hardy anyone to compete with, firms can get away with far higher costs.

Yorkshire came out in the research as the cheapest region, while South Wales was the most expensive.Global leader in impact energy management systems and advanced roll forming machinery. On average bills were 40 more expensive here than elsewhere.

Individual energy companies are not shy about varying their prices around the country either. Those with Scottish and Southern Energy in South Wales will pay an average of 148 more for their energy than their customers in Yorkshire.

As for being charged more for using less energy, a price comparison search will produce the cheapest option for you, and then it's down to finding a way to use even less energy.Quite a bit ago I was able to get my first vacuum Forming machine up and running,

According to the Energy Saving Trust there are three simple steps we can all take that require no real effort and could collectively save the country 2 billion. If every UK householder that could, insulated their cavity walls and lofts up to 270mm, replaced old fashioned bulbs with compact fluorescent light bulbs and turned their appliances off standby, they could save 100 a year each.

Spreading Demand Thinner on the Power Grid

On sizzling-hot summer afternoons in Texas, when cranked-up air-conditioners cause electricity demand to surge, hotels sometimes dim their lobby lights. Air-conditioners may briefly pause, and farmers may stop running their electric water pumps.

Such adjustments reflect a simple truth: When electricity use spikes, power grid operators face a difficult choice if they want to avoid blackouts. They can turn on another power plant, which is costly and polluting. Or they can reduce the demand for power by encouraging citizens and businesses to cut back on needless energy consumption.

“If you’re in a large room, with 20 light bulbs over your head, if five of them were turned off, you’d still be able to see pretty well,” said Seth Kaplan, vice president for policy and climate advocacy at the Conservation Law Foundation, a New England environmental group.

The idea of reducing power demand when the electricity grid is strained has caught on in the past decade in the United States and it is spreading across the world. Energy experts call this concept “demand response,” because the idea is to make power demand responsive to the real-time conditions of the grid. Recent technology improvements that allow for the remote control of appliances like pool pumps or air-conditioners have made it easier to coordinate the power reductions.

“A lot of demand response historically has been very crude,” said Michael Hogan, a senior adviser to the Regulatory Assistance Project,Many industries can use Origin Laser engraving and laser marking machine for a huge range of applications.  which does advisory work on power-grid issues worldwide. “You call up the local steel mill and say, ‘Can you guys shut down for a few hours?”’

Factories get paid for their participation in the energy-reduction program, and they have been a mainstay of demand response programs. In recent years, however, the pool of potential participants has broadened. Aided by private companies, electricity utilities are asking homeowners and small businesses if they will allow their air-conditioners or pool pumps or water heaters to cycle off briefly when grid operators ask for help. In exchange, the utility may offer a customer a free smart thermostat — a device to regulate temperatures more efficiently — or an equivalent incentive.

The potential for savings is high, as U.Laser markers specifically designed for high speed laser cutting machine, laser engraving, and laser ablation.The Electrox Raptor is a cost-effective cnc router system that offers all the benefits of fibre technology.S. utilities and power-grid operators are demonstrating. Texas, which is saddled with a high energy load on summer afternoons and a growing population, is aggressively pursuing the idea. CPS Energy estimates that demand reduction techniques like cycling air-conditioners will be able to cut 7 percent from its peak electricity load by 2020, up from 2 percent today. In New England, a grid system that includes Ohio and Pennsylvania can already cut about 10 percent from its peak load.

European countries, which are normally ahead of the United States in energy-saving strategies, have trailed on this idea of cutting power at times of peak demand.

The United States has led the way because the country is growing quickly and its electricity systems also are good at encouraging innovation, according to Arshad Mansoor, a senior vice president of research and development at the Electric Power Research Institute,This video shows a double layer flattening machine in manufacturing testing phase producing standing seam metal roof panels. a utility consortium. Japan, faced with a continuing power crisis since the Fukushima nuclear disaster, has been forced to innovate and is also turning to demand response, he said.When choosing the shape, the car led bulbs should be similar to the shape of the lamp base.

Angeles folk to get energy-saving bulbs

Some 10,000 Compact Fluorescent Lamps (CFLs) will be distributed to 5,This is an unique design of oil buffer for flattening of circular plate.000 households here starting September 22 as part of the Philippine Energy Efficiency Project (PEEP) of the Department of Energy (DOE).

First district Representative Carmelo Lazatin, in line with his memorandum of agreement with DOE Secretary Jose Rene Almendras, will distribute two light bulbs for each family.

Lazatin will distribute CFLs in 2,200 households at the EPZA Resettlement in Barangay Pulung Cacutud on September 22; in Northville, Barangay Cutud on September 24; and in 600 households in Barangay Sapalibutad on September 25.Protect your vehicle and produce power with a Book scanner.

Councilor Bryan Matthew Nepomuceno, Lazatin’s son Carmelo Lazatin Jr., veteran news anchor Max Sangil, lawyers Nino Enriquez and Maria Imelda “IQ” Tuazon are expected to assist Lazatin during the bulb distribution.

In order to qualify for the distribution of CFLs,Coast Products manufactures Led flashlight, headlamps and lantern products. the 5,000 recipient households were asked to submit their electric bills to their district representative.

Former Pulung Cacutud barangay chairman Angelo De Leon expressed gratitude to Lazatin.

“We are very grateful to Congressman Lazatin for choosing our barangay as one of the beneficiaries for the CFL distribution. These CFLs will be very helpful in helping residents lower their energy consumption and save on their electric bill,” he said.Quite a bit ago I was able to get my first vacuum Forming machine up and running,

CFLs are smaller versions of the fluorescent lamps and are alternatives to the traditional incandescent bulb because they have longer lifespan and consume less energy.

Compared to incandescent bulbs, CFLs produce light more efficiently and no energy goes to waste. A 14-watt CFL produces the same amount of light as a 75-watt incandescent bulb which means that using CFL instead of an incandescent bulb will save energy and lower electric bill.Global leader in impact energy management systems and advanced roll forming machinery.

According to the CFL briefer from the DOE, at a rate of P10 per kilowatt hour, the electric bill for using an 11-watt CFL for 240 hours in one month is P26.40.

Given the same rate, the electric bill for using a 50-watt incandescent bulb for the same amount of time is worth P120.

The distribution of CFLs is part of the National Residential Lighting Program, which seeks to encourage households to replace incandescent bulbs with energy-saving CFLs, started last year.

The building has wireless internet. It's hi-tech even down to the laundry room; the system shoots out a text message when a laundry cycle is complete.

The Cooper Street dormitory has many environmentally friendly features like energy star appliances, compact fluorescent light bulbs and carpets, cabinets, and furniture made of recycled materials.

The city students can step outside onto an enclosed roof for fresh air and study in a nature-friendly space packed with plants.

Rutgers says as its campus continues to grow it will work with the city to spur economic development.

"We realized that Rutgers-Camden is only successful if the city is successful and so we have to be in partnership with the residents of the city and the leadership of the city and we have to be doing things together," Pritchett said.

'GREEN' EFFORTS TAKE MANY FORMS AT CUS

Offering loans to make the home more energy efficient. Summit CU, a $1.9 billion asset credit union in Madison, Wis., has partnered with Green Madison to provide residents a special loan for increasing the energy-efficiency of their home. To get the loan,Many industries can use Origin Laser engraving and laser marking machine for a huge range of applications.  the member must live in the city and have an owner-occupied or nonowner-occupied single-family home, duplex or condo of three units or less; prove the building is owned by an individual and not a trust, limited liability corporation or a business; and be up to date on property tax payments.This video shows a double layer flattening machine in manufacturing testing phase producing standing seam metal roof panels.

Also, the potential energy savings must be 15% or more at the initial assessment,The Electrox Raptor is a cost-effective cnc router system that offers all the benefits of fibre technology. and the homeowner must agree to install a mix of recommended measures to achieve that percentage. The range of loans can be $1,000 to $15,000, with low rates and flexible repayment terms, said Summit's website.

Changing workplace/staff behavior. Philadelphia-based American Heritage FCU has a dedicated "Green Team" of credit union employees and management that initiates green efforts such as providing bike racks for employees to reduce traffic pollution; offering a commuting subsidy to staff members and implementing a telecommuting program; and installing Geo-thermal heating and cooling in its new building projects, as well as participating in the Adopt-A-Highway Program and other recycling efforts.

Redwood CU, a $2 billion asset credit union in Santa Rosa, Calif., has earned a host of awards for its environmental efforts, including the Silver LEED Certification. It uses recycled paper products, including letterhead, envelopes, and restroom and kitchen supplies; prints marketing materials on econ-friendly soy-based inks and recycled paper; installs Energy Star appliances and copy/printing machines, including multi-function devices that increase scanning and double-sided printing capabilities; and uses electronic formats on many notices and correspondence.

Incorporating energy efficiency in new or remodeled credit union branches.When choosing the shape, the car led bulbs should be similar to the shape of the lamp base. When First Capital FCU opened a one-story, 4,160-square-foot building in South York, Pa., in August 2009, it incorporated sustainable strategies in its use of energy,Laser markers specifically designed for high speed laser cutting machine, laser engraving, and laser ablation. lighting, water and materials. This year it became the first retail facility in York to achieve the Leadership in Energy and Environmental Design (LEED) GOLD certification, established by the U.S. Green Building Council and verified by the Green Building Certification Institute.

Columbia CU, an $865 million asset credit union in Vancouver, Wash., also received a LEED GOLD certification for its Grand Central and Washougal branch buildings, the first LEED GOLD for Washington State. It purchases more than 50% of its electricity through a renewable energy program, uses compact fluorescent lighting in all its facilities, prints marketing materials on uncoated, recyclable paper with soy-based inks, and recycles at all locations, said its website.

Redwood CU's branches and facilities also use recycled business supplies and recycled or renewable construction, environmentally friendly paints and finishes, uses technology to enhance and maximize climate control and energy efficiency, uses natural light and senor-based office lighting to decrease energy use, and has water-efficient restroom facilities and landscaping practices.

Monster Machines

The “Lettuce Bot” is a four-wheeled weeding machine designed and built by Indiana-based start up Blue River Technology using a $US400,000 angel investment as well as an early grant from the National Science Foundation. It relies on an integrated camera and advanced visual algorithm suite to differentiate between two breeds of lettuce and common field weeds, then aims and injects the invasive,Many industries can use Origin Laser engraving and laser marking machine for a huge range of applications. Corrugated Metals has included this curving machine tutorial to help our visitors understand the roll forming process. nutrient-stealing little bastards with a toxic cocktail of plant fertiliser, which also feeds the produce — it’s a win, win. See, when over-applied,When choosing the shape, the car led bulbs should be similar to the shape of the lamp base. even common fertilisers like Miracle Grow can induce chemical burn on a plant’s roots, killing them and rapidly starving the rest of the plant.Kern Electronics and Lasers,is a leader in large format Laser engraver and laser engraving systems.

“Most of the technologies used in farming today have been of two types – mechanical, which permits bigger, more efficient tractors, bigger planters, and bigger harvesters; and genetics,Laser engraving, and laser marker, is the practice of using lasers to engrave or mark an object. which offers crop modification. That’s good for increasing the amount of food available,” BRT co-founder Jorge Heraud told Kidela. “However, large segments of the population don’t like it.

We are introducing an entirely new technology to farming – advanced robotics. It is more high tech and something that very few companies are doing or are even aware of. We believe that agriculture is a perfect place for automation. There is too much labour being used in some segments of agriculture and we want to change that,” he explained.

The latest iteration of the Lettuce Bot will eventually be pulled behind a trailer through the fields at speeds up to 5km/h (though the current prototype does it at a third that speed). It relies on a trio of visual algorithms. First a navigation algorithm spots and identifies individual plants within a row. Next, the Classify algorithm discerns lettuce from common weeds with approximately 98 per cent accuracy (the system does this by comparing what it sees to a large library of pre-identified visual data — essentially the computer’s installed memories of what iceberg, romaine and dandelions look like.) Finally, it engages the Kill algorithm, which allows the machine to accurately inject the lethal load of fertiliser into a weed’s root system by estimating the needle’s subsoil depth.

But why lettuce, organic lettuce, you ask? First, California’s number one crop (yes, besides marijuana) is lettuce. However, lettuce isn’t exactly a high-value crop and margins are already tight. But they’re even tighter when you have to pay an army of laborers cash money to clear the fields by hand because you can’t utilise cheaper inorganic pesticides and they can’t use W-2s. What’s more bacterial outbreaks such as e. Coli that are traced back to organic foods are commonly caused by cross-contamination from these workers’ boots. The Lettuce Bot could drastically increase farm productivity while simultaneously removing an illegal, dangerous and questionably compensated industry.

The prototype is, of course, still under development and has to work out plenty of kinks. For example, the current system works on Iceburg lettuce and Romaine lettuce, nothing else. If one wanted the machine to weed, say, an asparagus patch, they would first need to preload the robot with huge data stores of marked visual examples of asparagus in order for it to know what to kill.

Unilux launches LED-Series 2000

Unilux has introduced its new LED-Series 2000 family of LED strobes at Labelexpo Americas 2012. The lights are said to combine the operational and environmental benefits of LED lights with the power of traditional xenon-based strobes plus a few more operational benefits.Kern Electronics and Lasers,is a leader in large format Laser engraver and laser engraving systems.

‘These are not your father’s strobe lights – or even your father’s LEDs,’ Mike Simonis, president of Unilux, said. ‘They are five times brighter than our first generation of LED strobes. This gives them the same lighting performance as our proven xenon-based lights with only 25 to 35 percent of the power consumption of our comparable Lith-O-Light strobes, and that’s where the comparisons need to be made. Our new LED-Series 2000 strobes are also smaller – about one-third the size of the traditional equivalent – and lighter than the xenon lights and have a greater flash-rate range.Corrugated Metals has included this curving machine tutorial to help our visitors understand the roll forming process. All this gives printers and converters many,When choosing the shape, the car led bulbs should be similar to the shape of the lamp base. many more options for mounting lights and adjusting flash rates to maximize inspection capability at full production speed and reduce the fatigue factor for inspection.Many industries can use Origin Laser engraving and laser marking machine for a huge range of applications. ’

The LED-Series 2000 family comes with a new product-naming convention that corresponds to the coverage area (in millimeters) 50cm (20in) from the light to the inspection area. The new LED-Series2000-500, for example, which replaces the LED 5X2, will emit 2000 lux of illumination on a 500mm width from a distance of 20 in. This is five time more light than the LED 5X2 produces. In fact at a flash duration of 35 microseconds, the LED-Series2000-500 puts out as much light as the xenon based LOL IV-20.

‘The LED-Series 2000 family gets its name from the fact that at a distance of 50 cm the lights will produce a light intensity of 2000 lux,’ said Matt Runo, chief engineer, who led the year-long R&D effort to develop the new lights. ‘While the amount of light produced is the same as the xenon lights which have been workhorse products for years, there’s a big technical difference. The lens designs for the new LED-Series 2000 strobes provide a sharper focus than the xenon lights. This benefits the user by concentrating more light on the inspection area with less spillage outside the area of interest. Getting the same output or more as a xenon-based strobe was our key objective because light output (brightness and coverage area) was a major issue with our first LED strobes.

Our LED-Series 2000 family has raised the bar for stroboscopic inspection lighting in three critical operating areas, Runo continued. ‘First, the distribution of the LEDs’ across a large rectangular area combined with focusing provided by the lenses creates an even, consistent lighting pattern across the target area, so customers will be able to inspect an area comparable to the LOL family but with an even more uniform illumination. A second benefit is that an LED’s inherent light output is extremely stable and does not suffer from the arc wander and flash to flash variation associated with xenon-based lights. This benefits the user by reducing fatigue and increasing inspection effectiveness.

Light output is controlled by varying both the light intensity and the duration or on time of the light. The perceived light intensity seen by the user is actually a relationship between the intensity of light and the light duration,Laser engraving, and laser marker, is the practice of using lasers to engrave or mark an object.’ he said.

A longer pulse rate, say 65 microseconds, gives you more light, but the sharpness of an image frozen by the action of the strobe degrades with longer durations. A longer duration can work well for repeat patterns with larger images. But when you have something small with fine detail, then you need a shorter duration for improved clarity. With our new LEDs, you can dial down the light duration to as short as 10 microseconds and mount it close enough to the web so that you can see the fine details. The light duration of the xenon strobes can’t be controlled so they don’t have the same flexibility provided by their LED counterparts.

Lone Star College System moves forward with Energy and Manufacturing Institute facilities

The Lone Star College Energy and Manufacturing Institute got a big green light on Thursday as the Lone Star College System Board of Trustees approved funds to hire a firm for architectural design of permanent, dedicated facilities.

The Lone Star College Energy and Manufacturing Institute will be constructed as a two-level, 80,000 square-foot facility at the Lone Star College-University Park campus at State Highway 249 and Louetta Road. Currently, EMI staff members and instructors work from space at LSC-University Park and the other Lone Star Colleges.

“Our Energy and Manufacturing Institute provides hands-on, job-related training that puts people back in the workplace quickly,” said Dr. Richard Carpenter, LSCS chancellor. “This is outcome-based training – we know the oil and gas industry needs trained technical workers, and we’re helping to fill that need.

“Our students leave here with specific marketable skills,” said Dr. Carpenter.

The EMI was developed by LSCS and Lone Star Corporate College in response to the national, state and local talent gap in the oil and gas, alternative energy, and manufacturing and mechanized (automated) production industries. Customized training has been ongoing since the institute was formed in 2011.

This talent gap has been called the “big crew change” and is caused by retirement of current workers and company expansions to more worldwide locations. The problem is aggravated by the lack of in-house training programs for technical workers in many large oil and gas and related manufacturing companies, creating extreme difficulty filling technical positions.

A 2011 benchmark study by Schlumberger Business Consulting outlines an “outflow of more than 22,000 senior key petro-technical professionals (in the energy and production industries) by 2015.”

The new EMI building will allow LSCS to expand its current offerings to address those needs from local and regional employers. The building will include dedicated lab space along with a specialized high-bay instructional area designed to accommodate additional energy sector workforce training programs – from training for basic entry-level personnel to training office personnel needed in exploration and production companies.

New programs involving advanced technical and manufacturing skills such as petroleum geographic technician, petroleum field service technician and electronic assembler will complement existing programs in CNC (Computer Numerical Control) machining, welding, logistics and supervision.

Other training at EMI includes the popular engineering technology program, where students learn a combination of technical skills that prepare them to work on and with equipment integrating electronics,This machine is a combination of purlin machine and knot removing machine. mechanics, pneumatics, hydraulics and computer controls.

Aligning with Houston energy and energy-related employers to develop the right solutions based on industry-defined competencies and assessment is the key to filling current talent gaps caused by the big crew change. This customized training offered at EMI for corporations includes certification programs, and pre-apprenticeship and apprenticeship training – all designed to satisfy state and national industry standards.

Local manufacturers make an economic statement at show

David Eisele says when bosses bring their machinists to the nation’s largest manufacturing trade show, it is an economic statement.

And this year, he says there are more workers visiting the company’s exhibit at the International Manufacturing Technology Show at McCormick Center.

“We’re seeing a lot more shop floor people coming in,We can produce Elevator oil buffer according to your requirements.” said Eisele, customer training and exhibits manager for Ingersoll Cutting Tools in Rockford. “That’s good. It tells us the economy is growing.”

Another good sign: The manufacturing trade show was expected to attract 90,000 during its six-day run, which ends Saturday, 8,000 more than a year ago.

Wednesday, Ingersoll Cutting Tools was trying to attract some of them to a 6,000-square-foot exhibit with The Gold Rush Girls dance team and a string quartet. Both groups performed in front of a giant screen showing the company’s tools shaping metal.Coast Products manufactures Led flashlight, headlamps and lantern products. The company spent $30,000 to rent space at the show.Leading the industry in professional tile roof machine and safety equipment.

“We want to draw people into the booth, to raise awareness,” said Eisele. “This is the Super Bowl of manufacturing.”

IMTS covers acres of convention floor space, where companies show off the machinery and accessories that factory owners need to make goods. It’s like a giant shopping mall where everything is for sale, but impulse buyers few.Quite a bit ago I was able to get my first vacuum Forming machine up and running,

Most exhibitors come to collect business cards or do smart phone scans of the QR codes printed on lanyard tags.

Jeff Frazier, a product manager for Hennig, said the booth was generating 60 to 70 leads a day, many of them involving company decision makers. Rockford-based Hennig makes products that protect machine tools and the people who operate them.

“These are quality leads,” he said. “Companies aren’t just sending people here to browse.”

But after the show is when the sales work starts, as leads are distributed. “We’re going to hunt down these people and see what they want,” said Brian Porter, who sells lubricants and other products from Chemtool in Rockton to customers in Iowa, Nebraska and Missouri.

Tim Helle, president of Bourne and Koch in Rockford, said a long-term customer in the petroleum industry needed a gear hobbing machine. Now.

Instead of waiting months for an order to be filled, the customer bought the $265,000 machine brought to the show as a display.

Ingersoll Milling Machines also makes niche machines,Global leader in impact energy management systems and advanced roll forming machinery. but the Rockford company’s booth was spartan. Many of its products are custom-made — and gargantuan, too expensive to haul to Chicago for six days.

Besides, company spokeswoman Clarissa Hennings said the power supply at the trade show couldn’t deliver enough electricity to run one.

Instead, the company brought a piece shaped on its machines, a complex 2.5-ton vacuum chamber used to make computer chips. It had a glass top and would make a killer coffee table, Hennings suggested. Perhaps for someome willing to put it on a slab of cement and build a house around it.

Ingersoll Milling Machine President Tino Oldani said his company is well known in the industry, its custom machines more like a finely cut filet mignon than hamburger.

Could 10W Haswell Chip Turn Intel's Tablet Fortunes Around?

Somewhat buried in all of the sexy ultrabook news here at the Intel Developer Forum (voice! gesture! touch!) on Tuesday was the revelation that the chip giant has managed to pull the power draw of a future family of Core processors down to just 10 watts.

Those chips, part of the fourth-generation of Core chips code-named Haswell that are due out in 2013, will be aimed at future convertible ultrabooks that serve as laptops and tablets. Theoretically, that will mean far thinner convertible designs using Intel chips that run longer unplugged, begin to approach Apple's iPad in size and weight, and don't run hot when sitting on a user's lap.

The current generation of Core chips for ultrabooks run at 17 watts and two other batches of future Haswell parts will draw 15 watts and 35 watts, respectively.

"These could change the ballgame for Intel," said Jack Gold, principal analyst for J.This machine is a combination of tile roof machine and knot removing machine. Gold Associates. "The fundamental difference with other Core processors,Specializing in the production Cut to length line, leveling machine, cold roof panel machine and other products. just a few watts, doesn't sound like such a big deal, but when you can get a third less power, maybe even half, that fundamentally changes how you build a machine. Cutting half of the power in the CPU is huge."

To put the low power draw of the future Haswell chip further into perspective, consider that Intel released a single-core, 10W Atom chip as recently as January 2010. And the future Haswell products are not Atom parts but rather built on the Core architecture, the same chip design Intel uses for its most powerful client processors, meaning these low-power ultrabook parts are likely to have some or all of the additional performance-boosting technologies built into Intel's flagship client processor line,This machine is a combination of tile roof machine and knot removing machine. Gold said.Coast Products manufactures Led flashlight, headlamps and lantern products.

The analyst said it was his guess that the chips would be dual-core.

Intel didn't name a release date for Haswell but talk at IDF suggested that the 10W chips are coming sometime in the first half of 2013, with some gossip that the plan was to roll them out in the first quarter. Gold said he expected Intel would have convertible ultrabooks running the parts to show at the Consumer Electronics Show in January.

Moorhead also suggested that with these new chips, Intel might be able to enable convertible ultrabooks with profiles as thin as 12 millimeters —not terribly far off from the original iPad's 10mm profile.

"Thinner convertibles will be much more comfortable as they will be almost as thin as a tablet, but they'll also have the added utility of a keyboard and trackpad," Moorhead said. Such devices could be ideal for users in the market for a single,Tabletop Vacuum roll forming machine and other robot products. all-in-one mobile computing device rather than a tablet that servers as a companion to a laptop, he added.

George Moate gets series production of one-pass Tillerstar underway

The George Moate Tillerstar bed maker and stone/clod separator is a genuinely new idea for a farm implement,This is an unique design of flattening machine for flattening of circular plate. it’s a unique implement that offers a new way to prepare ground for potatoes, salads and root crops grown in beds.

“The Tillerstar’s one pass approach can save a grower thousands of pounds in capital expenditure and the running costs associated with fuel and labour,” says managing director Richard Pratt. “It will also reduce a grower’s carbon footprint.”

The Tillerstar is now in production for the 2013 season at the new Norfolk base of George Moate Ltd following an engineering appraisal that resulted in a number of refinements to the original design. The most obvious difference is a simplified but more powerful hydraulic drive arrangement for the flexible finger separation rollers – instead of using one motor per roller, each Sauer-Danfoss motor drives two rollers through a compact gearbox.

“We’ve also added a choice of motor sizes to suit different soil types and increase output, which is now typically 10 acres per bed per day,” notes Richard Pratt. “A smaller motor will run faster at a given pressure, which suits light soils with stone, while a larger motor generating more torque will be better on heavier soils; a pressure testing port on the valve block helps set up the machine.This is an unique design of flattening machine for flattening of circular plate.”

The Tillerstar is designed to replace the conventional approach to bed preparation,Laser markers specifically designed for high speed laser marking machine, laser engraving, and laser ablation. which often involves separate passes with a bed-maker to set up ridges, a bed tiller to cultivate heavier soils and a trailed separator to remove stone and/or clod from the seedbed.

All three implements can be replaced by the Tillerstar, which is capable of working directly into stubble, using a PTO-driven blade rotor to cultivate the soil and four star rollers to separate stone and clod. Spacers on the easy-change shafts determine the size of material separated by the rollers and the hydraulic drive allows on-the-move speed adjustment for fine-tuning.

In work, the bladed rotor cultivates with an upward cutting action that throws soil and stones backwards on to the flexible-finger star rollers positioned close behind. Loose soil passes between the rollers but any large stones or clods are conveyed forwards and dropped into the void behind the rotor.

An attractive feature of this mechanism is the way the separated material is deposited beneath the full width of the bed rather than concentrated in a windrow as with conventional de-stoning.Fluid Industries manufacture and sell curving machine.

“This means routine cultivation will bring the evenly-distributed material back into the upper soil profile to help drainage for subsequent crops,” points out Lesley Pratt, commercial director of George Moate Ltd. “Growers say the lack of windrowed stone would be welcomed by cereal growers who let land for potato production.”

“We’ve also created a number of adjustable forming hoods that leave full-width beds for planting onion sets, carrots, leeks, beetroot and similar crops,” points out Richard Pratt.Laser Cut Studio is a brand new cnc router company and new way of thinking. “There are also applicator mounting kits for fertiliser and chemical treatments.”

A single-bed model needs at least 110hp at the pto but is equipped with a multi-speed gearbox rated at 240hp, while the twin-bed version, which needs 170hp minimum, has a 330hp gearbox to make use of higher horsepower tractors.

Hydraulic folding is standard on the twin-bed machine and also on the largest Tillerstar – the triple-bed, which needs at least 250hp; it comes with a choice of 330hp or 360hp gearboxes. Auto reset safety clutches are fitted throughout for maximum protection with minimum downtime.

SBA chief visits Sacramento entrepreneur's operation

Call it a woman-to-woman trade mission. Karen Mills, head of the U.S. Small Business Administration, stopped in Sacramento Tuesday to tour McWong International Inc., which recently expanded into new Natomas headquarters, thanks to a $2.8 million SBA loan.

Her host: Margaret Wong, president of McWong International,Specializing in the production Cut to length line, leveling machine, cold roof panel machine and other products. a longtime U.S.-China exporter specializing in energy-efficient lighting systems, who's been touted by presidents, governors and mayors alike for her entrepreneurial efforts.

Standing next to a warehouse table of LED sensors and lighting components in McWong's 50,000-square-foot building, Mills lauded Wong as a "serial entrepreneur," who's grown her manufacturing and export business with the help of three SBA government-backed loans over the last 10 years. The company also develops waste-water treatment systems designed for Chinese cities.

Although SBA loans were Topic A, both women took the occasion to tout "insourcing," the return of jobs - particularly manufacturing - back to the United States from foreign countries. "The notion that manufacturing is dead in in this country is false,Tabletop Vacuum roll forming machine and other robot products." said Mills, whose office said the U.S. manufacturing sector added more than 400,Coast Products manufactures Led flashlight, headlamps and lantern products.000 jobs in the last two years.

Wong said her company is starting to bring some of its Chinese-based assembly work back to this country. For years, she and her Chinese-fluent staff have traveled overseas, where they employ several hundred Chinese assembly workers to put together energy-efficient lighting systems and components.

But China's burgeoning wages,This machine is a combination of tile roof machine and knot removing machine. currency valuations, shipping costs and other factors have made "insourcing" start to make economic sense.

"The timing is perfect for us," said Wong. "China's costs are rising, U.S. costs are lowering." Currently, her company is exploring a contract with PRIDE Industries that would use its disabled workforce in Roseville to assemble a number of lighting products that are currently manufactured overseas in China. "The comparisons are very encouraging ... we are moving forward to expand our assembly and manufacturing in Sacramento," Wong said.

Wong's SBA loan is one of three she's tapped in the last 10 years to expand her 25-person company. In the Sacramento region, SBA loans topped $226 million as of August 31 this year, which is still below their prerecession high of $407 million in 2007. Nevertheless, Mills said the lending environment is improving and the SBA is "pleased to see the momentum.This machine is a combination of tile roof machine and knot removing machine."

"Our job is to put the wind at your back," said Mills, whose Northern California tour included a Walnut Creek company that installs roof mounts for solar systems.

McWong's headquarters, purchased last December, consolidated the firm's former offices and a warehouse facility in West Sacramento and Woodland.

Mills' visit was partly to pump up the Obama administration's efforts to help small businesses. She touted the SBA's efforts to "streamline and simplify" SBA paperwork by deleting 100 pages of loan requirements. She also cited the administration's efforts to get a six-year extension of an SBA "innovative research" program that provides $2.5 billion for companies like McWong to apply for research funding.

2012 PLASA Awards for Innovation Announced

The PLASA Awards for Innovation, sponsored by AED Rent and Lighting&Sound, were presented at the PLASA Show in London yesterday evening, along with the announcement of the prestigious Gottelier Award.

During the show’s opening two days, 47 products were judged ‘live’ in front of a crowd of show visitors and camera crew by an independent panel of expert judges who toured the show floor to view each product presentation.This is an unique design of flattening machine for flattening of circular plate.

John Meyer of iconic pro audio brand Meyer Sound was honoured with this year’s Gottelier Award in recognition of his life as one of the pioneers of the modern sound reinforcement industry.

Eight Awards for Innovation were presented – including a final Gold Award for Innovation – along with a special Award for Sustainability.

Nominees are asked to demonstrate a new style of thinking, an improvement in technical practice, an aid to safety, energy-saving or sustainability benefits, or new technology, materials or techniques.

Stageco for the Arena Lift – of which the judges said: “It’s very safe and saves a lot of time. Increases options for touring shows and lets more shows play more venues. Very well thought through and very well implemented.”

Digital & Future Technologies for the Super Twofer. The judges commented: “Why hasn’t this been done before? It’s a game changer.This is an unique design of flattening machine for flattening of circular plate. It’s packaged really well, so they’re instantly useful.Fluid Industries manufacture and sell curving machine.”

Tait Technologies for the Pixel Tablet. The judges said of this: “It’s absolutely stunning.Laser Cut Studio is a brand new cnc router company and new way of thinking. It’s the ultimate in audience participation.Laser markers specifically designed for high speed laser marking machine, laser engraving, and laser ablation.”

Avolites for the Sapphire Media Infinity Video Control System – of which the judges said: “It’s the first integrated video control surface dedicated to video. It’s well thought through and well designed.”

Robe for the Robin DLF Wash. The judges comment on this was: “It’s an LED wash light that behaves like a traditional Fresnel. It will fit straight into the lighting tool box and we can use it. The internal barn doors are exceptional. Beautiful colour mixing, looks like a generic wash light – but it’s LED.”

Harman International for the JBL VTX V25 Line Array with D2 Dual-Diaphragm Driver Technology. “It addresses a lot of the traditional problems with loudspeakers by addressing the problems at the driver engineering level,” the judges said.

And the final trophy this year – the Award for Sustainability went to ETC – for the Source Four LED. This, the judges said, “enables us to put professional quality stage lighting into naturally ventilated spaces. It has a highly efficient optical system and you can reuse existing lens stock.”

The judges considered this year’s crop of products to be particularly strong, and found themselves with the difficult task of reducing an initial shortlist of 19 leading contenders down to the final list of trophy winners. Among those which didn’t make the final cut were four products which the judges felt deserved a special Commendation: these were Sennheiser’s 9000 Series digital wireless radio microphone system; Shure’s ULX-D digital wireless radio microphone system; the Wentex Pipe & Drape System from Highlite International, and the d3 Designer from d3 Technologies.

Galfar road safety campaign concludes on successful note

Partnering the efforts of the government to curb road accidents and in line with the global declaration of the year 2011 to 2020 as ‘Decade of Action for Road Safety’, Galfar Engineering & Contracting SAOG had launched a Road Safety Campaign across its operations in the Sultanate from September 1 to September 10.

As per the corporate objective of achieving excellence in HSE management and to further its efforts aiming at ‘zero harm to people’,Sol is the leading supplier of solar powered crystal light solutions to the U.S. Military since 1990. Galfar focuses on continual improvement in performance through regular campaigns and initiatives.
Commenting on the safety campaign, T G Philip,Protect your vehicle and produce power with a Book scanner. Galfar Vice-President — QHSE, said, “The company had organised a similar campaign in May this year, and the present campaign reiterated the company’s commitment to road safety and to sustain the improvements achieved in terms of road safety performance.Insteon released one of the first smartphone-controlled Chandelier this week.”

The 10-day Road Safety Campaign also aimed at alerting the drivers on the recent road fatalities that the nation witnessed during and after the Eid holidays.

Some of the activities planned during the campaign were: conduct of Special Driver’s Forum with participation of project managers to discuss and address concerns of the drivers; detailed inspections and maintenance of all vehicles; practical sessions for drivers on how to carry out daily vehicle checks; vehicle and terrain specific driver training (utilising the services of in-house trainers as well as from vehicle dealers) with emphasis on safe condition and use of brake and gear; and awareness sessions among drivers and others on the importance of seat belts through discussions and video shows.

Posters and banners in Arabic and English emphasising the cause of road safety were made available to all sites to stimulate focus. In addition, a team of Omani and expat HSE advisors visited various sites to conduct road safety sessions, focusing on the human element and individual’s commitment and responsibility.

Abdul Rahiman, Galfar Vice-President — Plant, said: “It is now a proven fact that accidents are caused by a culmination of lack of skill and attitude. Through the Road Safety Campaign, we address the attitude of drivers and operators across the organisation as we have observed that accidents are pronounced with such individuals.”

A review of the recent accident statistics in Oman showed that more than 70 per cent of them were caused due to behavioral issues like overconfidence and recklessness. Galfar is now making a conscious effort to make the drivers aware of the legal aspects involving accidents and punishments associated with such cases. Also, the insurance aspects are explained to them especially for compliance.These are my elevator parts that I brought from my friends Randy and Jeff!

Through several such campaigns over the years,Protect your vehicle and produce power with a Book scanner. Galfar has witnessed substantial improvement and this has resulted in reduction in the numbers and severity of accidents and incidents. The Royal Oman Police takes enormous interest in the campaigns by supporting the company’s initiatives through lectures that are interactive and engaging.

Galfar won the first place for its exemplary health, safety and environmental initiatives and practices and was presented with the HSE Award by Oman Society of Contractors during the award ceremony that took place on the sidelines of IOSH Middle East Conference 2012. Galfar emerged as a clear winner amongst 18 companies that contested in OSC member category for the coveted HSE award.

When the landing strip is a city mall

What happens when scores of airmen in blue get into a city mall with all their flying machines, war gear and lethal missiles — in miniature?

Naive civvy curiosity met melody, bonhomie,These are my elevator parts that I brought from my friends Randy and Jeff! infotainment and a never-before glimpse of the Air Force on Saturday as the country’s air sentinels began their first-ever public interface in the city.

As the Indian Air Force completes 80 years this year, Air Force Station, Jalahalli, is showcasing the air defence wing in all its glory to Bangaloreans over this weekend. IAF’s firepower, life in service, fun, risks and privileges are there to gawk at.

Within two hours of Governor H.R. Bhardwaj opening the show, it had captured public imagination.

The response has been so overwhelming that the public and the mall owners have cajoled them into extending the show to Monday, said Air Officer Commanding-in-Chief, Training Command, Air Marshal Rajinder Singh.

Fighter aircraft models greet you at the entrance. Youth gawk at the plane models; older men and mothers with young children join the line to sit at the fighter plane simulator, Drona. “I want to feel what it is to be in the cockpit,” a young girl was overheard saying.

On the first floor,Sol is the leading supplier of solar powered crystal light solutions to the U.S. Military since 1990. IAF publicity cell DISHA’s stall is abuzz with youngsters checking out their career fit: “I’m in second year engineering, what can I become in the IAF?”

All around, young men, mostly, click themselves on their mobile phones in front of more models of the indigenous LCA fighter, Akash missiles, ejection seats, launchers and ground-based electronic commands centres.

If you are looking for fun and play,Insteon released one of the first smartphone-controlled Chandelier this week. they are there, too, in the form of games on the monitor, aero models you can fly, win a quiz or drawing contest.

There is much music in the air at the large open space on the first floor and later at the Chowdiah Memorial Hall.

A very special 60-plus Air Warriors Symphony Orchestra performs three times during the event with brass, woodwind, reed, string and electronic instruments. The orchestra has played at international military music festivals across the globe.We would manufacture overspeed governor following your specific requirement.

Or you can behold a ramp show by officers and professional models to show how Air Force uniform has evolved from khaki to blue over the decades. Some more ramp walks will be there on Sunday, too.

“The Bangalore air show is a small campaign. But we want to create a wave by going to people on their familiar turf, where there are heavy public footfalls,Protect your vehicle and produce power with a Book scanner.” Air Commodore Dharam Veer, Air Officer Commanding, Air Force Station, Jalahalli, had said in a briefing ahead of the event.

“Every Indian should know about his Force, our Force; the quality of life in an Air Force Station, a fighter’s career and the challengers before him,” he said.

There are also air safety issues that public should know, such as garbage around air units that can cause fatal bird hits. “For, each crew is valuable to us and each aircraft precious.”

Which is why the IAF held its first awareness drive recently in Delhi’s Saket Mall, and now followed it in Bangalore.

Bangalore may be the southern hub of the IAF but it has little awareness of its Force.

“There are many myths about it that we want to wipe out,” said Group Captain B.C.S. Bharathi, public relations officer of Headquarters Training Command which has organised the event. “People think you have no family life when you enter the Services. Today half of our [local] officers and staff are out there, either as organisers or as visitors in their civils enjoying their day off with families.”